Abstract:The joint made of cast steel is frequently utilized within a treelike column structure to ensure a smooth transition. It is of great significance in ensuring the overall structural safety, but currently, the mechanical property and bearing capacity of this type of joint cannot be fully understood. This study investigates the load characteristics of three-forked cast steel joints through concrete experiments, finite element analysis, and regression method formula derivation, filling the gap in mechanical properties and calculation formulas of forked cast steel joints. Initially, a comprehensive model of the cast-steel joint, sourced from a practical engineering, underwent vertical load testing. Detailed scrutiny of stress distribution and vertical displacement of the tested joint was conducted based on the experimental outcomes. Subsequently, a finite element model of the tested joint was constructed using SolidWorks and subjected to analysis via ANSYS. The numerical findings were juxtaposed with experimental data and extrapolated to encompass other parametric scenarios. Ultimately, a regression analysis method was employed to derive a calculation formula for the load-carrying capacity of branch-bearing cast-steel joints. The regression analysis method can accurately obtain the load-bearing capacity calculation formula for tree-shaped joint models and can be extended to determine corresponding branch and main pipe dimensions, as well as the deviation angle between branches and the main pipe, under known load conditions. This improves design efficiency and accuracy. Comparative analysis reveals a substantial concurrence among experimental, finite element analysis, and formula-based predictive outcomes. The maximum error between experimental results and those obtained from finite element analysis is 9.02%. The maximum error between the results calculated using the load-bearing capacity formula derived from regression methods and those from finite element analysis is only 1.9%.

Experimental Study on Bearing Capacity of Beam-Column Pin Joints in Long-Span Steel Structure Under Heavy Load

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Experimental study on floor truss pinned connection in large-span steel structure

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental and analytical investigations on a large floor truss pinned connection

Study of the Mechanical Properties of Beam-Column Joints in a New Type of Aluminum Alloy Portal Frame

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Experimental and Numerical Study on Cyclic Behaviour of Steel Beam-to-column Joints

Static Bearing Capacity Investigation of a Novel Prefabricated Light-Steel Beam–Column Connection

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Experimental investigation and simulation analysis of cast-steel joints under vertical pressure

Static and Seismic Experimental Study of Novel Prefabricated Beam-Column Joints with Elongated-Hole Brackets

Finite Element Analysis of Bearing Properties of Floor Structure of Precast Cold-Formed Steel Building

Experimental Study on the Mechanical Performance of Column Underpinning Joints with Prestressed U-Shaped Steel Bars

Experimental Investigation on the Behaviour of Aluminium Alloy Beam-to-column Joints Connected by Swage-Locking Pins

An assessment of application of the component-based method to full range behaviour of joints between steel beam to concrete filled steel tube columns under extreme loading conditions

Experimental and Numerical Investigation of Cross-Shaped Joints with Adjustable Stiffness for Cold-formed Thick-Walled Steel Column–Column Connections

Experimental study on the seismic performance of beam-to-column composite connections in medium-high strength steel frame structures