Abstract:We first present preparation of MnOx–CeO2–Al2O3 catalysts with varying Mn contents through a self-propagating high-temperature synthesis (SHS) method, and studied the application of these catalysts to the selective catalytic reduction of NOx with NH3 (NH3-SCR). Using the catalyst with 18 wt.% Mn (18MnCe1Al2), 100% NO conversion was achieved at 200°C and a gas hourly space velocity of 15384hr−1, and the high-efficiency SCR temperature window, where NO conversion is greater than 90%, was widened to a temperature range of 150–300°C. 18MnCe1Al2 showed great resistance to SO2 (100 ppm) and H2O (5%) at 200°C. The catalysts were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and H2 temperature programmed reduction. The characterization results showed that the surface atomic concentration of Mn increased with increasing Mn content, which led to synergism between Mn and Ce and improved the activity in the SCR reaction. 18MnCe1Al2 has an extensive pore structure, with a BET surface area of approximately 135.4m2/g, a pore volume of approximately 0.16cm3/g, and an average pore diameter of approximately 4.6 nm. The SCR reaction on 18MnCe1Al2 mainly followed the Eley-Rideal mechanism. The performances of the MnOx–CeO2–Al2O3 catalysts were good, and because of the simplicity of the preparation process, the SHS method is applicable to their industrial-scale manufacture.

Influence of Mn/(Mn+Ce) Ratio of MnOx-CeO2/WO3-ZrO2 Monolith Catalyst on Selective Catalytic Reduction of NOx with Ammonia

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Tungsten Modified MnOx–CeO2/ZrO2 Monolith Catalysts for Selective Catalytic Reduction of NOx with Ammonia

The Influence of Molar Ratios of Ce/Zr on the Selective Catalytic Reduction of NO X with NH3 over Fe2O3-WO3/Ce X Zr1−x O2 (0 ≤ X ≤ 1) Monolith Catalyst

Improvement of Catalytic Activity over Mn-modified CeZrO, Catalysts for the Selective Catalytic Reduction of NO with NH3

Monolith Ce0.65zr0.35o2-Based Catalysts for Selective Catalytic Reduction of No with Nh3

Low-temperature Selective Catalytic Reduction of NO with NH3 over Monolith Catalyst of MnOx/CeO2–ZrO2–Al2O3

Selective Catalytic Reduction of NO with NH3 on Modified ZrO2-MnO2 Monolithic Catalysts

Mn0·4/Co0·1Ce 0·45Zr0·45OX, high performance catalyst for selective catalytic reduction of NO by ammonia

The activity and characterization of MnOx–CeO2–ZrO2/γ-Al2O3 catalysts for low temperature selective catalytic reduction of NO with NH3

Low-temperature selective catalytic reduction of NO with NH3 over MnOx-CeO2/ZrO2-TiO2 monolith catalyst

Catalytic Performance of Acidic Zirconium-Based Composite Oxides Monolithic Catalyst on Selective Catalytic Reduction of NOx with NH3

Highly Selective Catalytic Reduction of NOx by MnOx–CeO2–Al2O3 Catalysts Prepared by Self-Propagating High-Temperature Synthesis

Selective Catalytic Reduction of NOx with NH3 over Mn-Ce Mixed Oxide Catalyst at Low Temperatures

Low-Temperature Selective Catalytic Reduction of NO with NH_3 over MnO_x-CeO_2/ZrO_2-TiO_2 Monolith Catalyst

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Novel Mn–Zr Mixed Oxide Catalysts

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts

Manganese Doped CeO2–WO3 Catalysts for the Selective Catalytic Reduction of NO with NH3: an Experimental and Theoretical Study