Abstract:A compact high-power four-port circulator aiming to simplify the conventional, complex, and bulky injection-locking magnetron system is proposed. To reduce the performance deterioration and the risk of ferrite rupture under long-term high-microwave-power condition, the method of breaking a monolithic ferrite into three discrete ferrites in a conventional three-port circulator is proposed. To miniaturize the size and cost of the four-port circulator, a butterfly-shaped waveguide structure is proposed, with a stub inserted into the cavity at the central point and with no connecting waveguide. Multiphysics simulation results show that the temperature coefficient of variation (COV) at the surface of the discrete ferrites is 12.4% lower than that of a monolithic ferrite circulator, with input microwave power of 10 kW. The size of the proposed four-port waveguide circulator is 27% less than the assembly of two three-port circulators, and way smaller than a conventional differential phase shift circulator (DPSC). The simulated and measured S-parameters match well, and the measured power capacity of the fabricated circulator is higher than 3 kW (limited by the experimental condition). A magnetron is successfully locked using only one designed compact circulator. The research in this paper promotes the development of injection-locking magnetron and provides a design example for the compact, high-power circulator.

Compact Suspension-stripline Circulator for High Power Applications

Folded Circulator with Shorted Y‐junction for High Power Applications

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

A Novel Microwave Ferrite Circulator with Flexible Hybrid Structure and Wide Bandwidth

Design and Simulation on Microstrip Circulator Based on YIG Ferrite Material

Synthesis of Waveguide Single Junction Four-Port Circulators with Turnstile Resonators

Design and simulation of miniaturized microstrip circulator

Design and Fabrication of Self-biased Microstrip Double-Y Junction Circulator

Compact Four-Port Waveguide Circulator Using Discrete Ferrites for Injection-Locking Magnetron System

Design of X-Band Circulator and Isolator for High-Peak-Power Applications

Design of microstrip Y-junction circulator based on ferrite thin films

Compact Four-Way Suspended-Stripline Power Divider With Low Loss And High Isolation

A Compact Microtrip Filtering Power Divider Made of Novel Coupled Resonators

Magnet-Free Miniaturized Circulator Based on Non-Reciprocal Network

Compact in-phase power divider integrated filtering response using spiral resonator

Design of X band multilayer chip microstrip ferrite circulator

High-Power Ridge Waveguide Four-Port Junction Circulator Based on Composite Post Resonators

A Compact X-band Circulator with Embedded Feed Line Based on Substrate Integrated Waveguide

Simulation of self-biased coplanar circulator using barium ferrite thin films

Self-Biased Microstrip Junction Circulator Based On Barium Ferrite Thin Films For Monolithic Microwave Integrated Circuits

Superconducting Non-Reciprocity Based on Time-Modulated Coupled-Resonator Systems