Abstract:This paper solves this problem by exploiting an incomplete wall waveguide to reduce the height of circulator by 50%. Although these changes always reduce the frequency bandwidth of the element, the proposed technique optimizes the dimensions of the ferrite and its magnetic characteristics, increases the bandwidth to 400 MHz in 2.9 GHz, which is the idea bandwidth required by many radar systems which has been reached. One of the most important components in the radar and microwave industry that provides transmitting and receiving features for an antenna at the same time is called a circulator. Ferrite circulators are passive three‐port devices in which the RF or microwave signal is transmitted from one port to other port without leakage to the third port. One of the main disadvantages of these waveguide elements is their large dimensions and especially their height, which cannot be used in some systems due to the limited workspace. This paper solves this problem by exploiting an incomplete wall waveguide to reduce the height of the circulator by 50%. These changes always reduce the frequency bandwidth of the element, the proposed technique optimizes the dimensions of the ferrite and its magnetic characteristics and increases the bandwidth to 400 MHz in 2.9 GHz, which is the ideal bandwidth required by many radar systems that have been reached. The ferrite circulator designed and built in this article has a port with a width of 72.13 mm and a height of 17 mm in the S‐band. The method results in a low insertion loss which is less than 0.5 decibels and a high isolation which created more than 20 decibels. The designed and optimized elements have been implemented and the test results verify the theoretical results.

Design of X-Band Circulator and Isolator for High-Peak-Power Applications

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Compact Suspension-stripline Circulator for High Power Applications

Design of X band multilayer chip microstrip ferrite circulator

Design and construction of ferrite waveguide circulator with short wall in S band

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

Design of a High Isolation F-band E-plane Waveguide Power Divider

A Novel Microwave Ferrite Circulator with Flexible Hybrid Structure and Wide Bandwidth

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

Design of a Compact Variable Waveguide RF Power Splitter for High-Power Applications

Folded Circulator with Shorted Y‐junction for High Power Applications

DESIGN OF A COMPACT VARIABLE X-BAND RF POWER SPLITTER

Integrated Active Quasi-Circulator with 27 Db Isolation and 0.8–6.8ghz Wideband by Using Feedback Technique

Study of Millimeter Wave Circulators Based on the Methods of Circular Polarization Isolation

High-Power Ridge Waveguide Four-Port Junction Circulator Based on Composite Post Resonators

An Integrated Tunable Isolator Based on NiZn Film Fabricated by Spin-Spray Plating

Synthesis of Waveguide Single Junction Four-Port Circulators with Turnstile Resonators

Design of a Variable X-band RF Power Splitter

Packaged Filtering Power Divider with High Selectivity, Extended Stopband and Wideband Isolation

Design A Ka-Band Integrated Microstrip Isolator