Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Millimeter wave complementary metal–oxide–semiconductor on-chip hexagonal nano-ferrite circulator

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

Millimeter wave and sub-millimeter wave circuits for integrated system-on-a-chip

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

Phase formation, microstructure and gyromagnetic properties of c-axis oriented M-type hexaferrite applied to self-biased circulator

The design and fabrication of LTCC chip inductors for high frequency applications based on barium ferrites

An exotic uniaxial hexagonal ferrite with narrow self-biased ferrimagnetic resonance linewidths: Cu 18H hexaferrite

Compact Four-Port Waveguide Circulator Using Discrete Ferrites for Injection-Locking Magnetron System

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

Fano-enhanced low-loss on-chip superconducting microwave circulator

On-chip superconducting microwave circulator from synthetic rotation

Ferrite-Partially-Filled On-Chip RF Inductor Fabricated Using Low-Temperature Nano-Powder-Mixed-Photoresist Filling Technique for Standard CMOS

Application of ferrite nanomaterial in RF on-chip inductors

Heterointerface engineering in quaternary magnetic structures for high-efficiency and thermal stable microwave absorption

Ultrahigh Frequency and Anti-Interference Optical-Mode Resonance with Biquadratic Coupled FeCoB/Ru/FeCoB Trilayers

An Overview of New Design Techniques for High Performance CMOS Millimeter-Wave Circuits.

Hierarchical design of FeCo-based microchains for enhanced microwave absorption in C band

The preparation and performances of Co-Zn 18H hexagonal ferrite with an ultra-high magnetic resonance frequency and low-loss characteristics

Magnetic and dielectric properties of Mn 2+ and Nb 5+ -doped NiCuZn ferrites for K-band junction circulators

Monolithic Integrated Multiband Acoustic Devices on Heterogeneous Substrate for Sub-6 GHz RF-FEMs

On-chip soft-ferrite-integrated inductors for RF IC