Abstract:ABSTRACT In this paper, a design procedure of a compact broadband microstrip diplexer working on the Very High Frequency (VHF)/Ultrahigh Frequency (UHF) band is proposed. The diplexer consists of a fourth‐order Butterworth Low‐Pass Filter (LPF) and a sixth‐order elliptic High‐Pass Filter (HPF). The two filters are located on two substrates with a common ground. A microstrip‐to‐coaxial structure is utilized to transmit the power flow between the two substrates. For miniaturization, the utilized ideal capacitors and inductors are realized by the commercial lumped‐element capacitors and the curved microstrip line sections, respectively. All the middle design and rapid optimization processes from the schematic simulation by Advanced Design System (ADS) to the circuit simulation by CST STUDIO SUITE (CST) are given in the article. A prototype is fabricated and measured. The testing results are consistent with the simulation. The diplexer can operate at 225–775 and 880–2500 MHz. The insertion losses are 0.8 ± 0.3 and 0.9 ± 0.4 dB in the two working bandwidths. The isolation bandwidth of −20 dB level is as small as 105 MHz. The roll‐off is also sharp that the related bandwidths corresponding to the attenuation level −3 to −20d B are 90 and 30 MHz to the high and low bands, respectively. Besides, the return loss and isolation are larger than 10 and 20 dB approximately. The diplexer has a volume of 0.065 λ g × 0.156 λ g @775 MHz, which can be utilized to feed the miniaturized broadband VHF/UHF antenna system.

Compact Superconducting Diplexer Design with Conductor-Backed Coplanar Waveguide Structures

Design of Compact Superconducting Diplexer with Spiral Short-Circuited Stubs

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

An LTCC duplexer for GSM/DCS applications

Wideband superconducting diplexer with stepped-impedance cross-structure

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

High Isolation Superconducting Diplexer Designed with Double-side Structure

High Performance Superconducting Common Resonator Diplexer and Analysis Between Isolations and Topologies

Design and Optimization of a Superconducting Contiguous Diplexer Comprising Doubly Terminated Filters

Design and Performance of a Compact Superconducting Duplexer at VHF-band

Design of Quad-Channel High-Temperature Superconducting Diplexer Using Spiral Stub-Loaded Resonators

A Narrowband Superconducting Quadruplexer with High Isolation

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

A Compact and High-Isolated Multiresonator-Coupled Diplexer

Miniaturized Wide-Stopband FSIW-LC Diplexer With High Selectivity and Narrow Channel Spacing

Design and Rapid Optimization Procedure of a Compact Broadband Microstrip Diplexer for VHF/UHF Band

High-isolation high-temperature superconductive diplexer and design method thereof

Low‐loss compact diplexer based on complementary spiral resonators

A compact diplexer using meander-line resonators and a new coupled junction for 5G and WiMAX application