Abstract:This paper presents the modeling and optimization of a manifold-coupled superconducting quadruplexer at VHF-band. The quadruplexer consists of four individually designed channel filters with a bandwidth of 400 kHz centered at 216, 224, 232, and 240 MHz, respectively, connected to a common manifold. The complex interactions between the channel filters make the design and optimization of the quadruplexer difficult and even impossible. An equivalent circuit for the manifold and the capacitive external couplings of the four channel filters in the quadruplexer is presented. The parameters of the equivalent circuit are accurately extracted from electromagnetic simulations. Afterward, the equivalent circuit is optimized to compensate for the interactions between the channel filters and obtain a good common-port return loss and channel transfer characteristics. Thereafter, the design of the individual channel filters is improved according to the optimized parameters of the equivalent circuit. The superconducting quadruplexer is successfully designed and fabricated. The measurements show high performance and match well with the simulations. The experimental insertion losses of the four channels are less than 0.45 dB, the center frequency discrepancies of the four channels are less than 40 kHz, the common-port return loss is greater than 16.3 dB, and the out-of-band rejection is higher than 90 dB. Moreover, a high isolation greater than 75 dB between the channels is achieved.

A Narrowband Superconducting Quadruplexer with High Isolation

Design and Optimization of a Compact Superconducting Quadruplexer at VHF-Band with an Accurate Equivalent Circuit Model

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

High Performance Superconducting Common Resonator Diplexer and Analysis Between Isolations and Topologies

High Isolation Superconducting Diplexer Designed with Double-side Structure

Compact Superconducting Diplexer Design with Conductor-Backed Coplanar Waveguide Structures

Compact Diplexer with High Isolation Using the Dual-Mode Substrate Integrated Waveguide Resonator

Design of Quad-Channel High-Temperature Superconducting Diplexer Using Spiral Stub-Loaded Resonators

Design of high selectivity narrowband eight-order high-temperature superconducting sextaplexer

High Isolation Diplexer Using Quarter-Wavelength Resonator Filter

A Superconducting Manifold-Coupled Triplexer with an Iterative Design Method at X-Band

Wideband superconducting diplexer with stepped-impedance cross-structure

Design and Optimization of a Superconducting Contiguous Diplexer Comprising Doubly Terminated Filters

Design of Compact Superconducting Diplexer with Spiral Short-Circuited Stubs

High Isolation Tunable Diplexer Based on Mixed Electromagnetic Coupling

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

Design and Performance of a Compact Superconducting Duplexer at VHF-band

High-Isolation and Wide-Stopband SIW Diplexer Using Mixed Electric and Magnetic Coupling

High Isolation Substrate Integrated Waveguide Diplexer With Flexible Transmission Zeros

Compact Diplexer with High Isolation and Wide Stopband Based on SIRs