Abstract:A miniaturised high‐isolation K‐/Ka‐band diplexer with exceeding adjacent channels using 3D antarafacial channel integration and vertical‐quasi‐coaxial‐based matching network is proposed. Working principle, design method and test solution of this proposed K‐/Ka‐band diplexer are well illustrated, and the high‐isolation (>40 dB) in very adjacent wideband channels at K‐band (18–23.5 GHz) and Ka‐band (25.8–31.6 GHz) is achieved within a tiny size of 9 × 4 × 0.87 mm. A miniaturised high‐isolation K‐/Ka‐band diplexer with exceeding adjacent channels using 3D antarafacial channel integration and vertical‐quasi‐coaxial‐based matching network is proposed. For smaller size, lower loss and lower channel interference, the high‐order low‐pass filter for the K‐band channel and the four‐line‐interdigital‐coupled wideband bandpass filter for the Ka‐band channel are respectively designed on two low‐loss glass‐based substrates, and these two substrates are integrated on the two antarafacial surface of the mounting board. The vertical‐quasi‐coaxial (VQC) embedded in the mounting board is not only used as three‐dimensional (3D) interconnection of the two antarafacial channels but also designed as the constituent part of the matching/isolation network, and this can effectively decrease the impedance traction caused by the Ka‐band filter for the K‐band channel of the diplexer. In addition, four transmission zeros of the K‐band filter are designed at the whole passband of the Ka‐band channel to improve the isolation to the K‐band channel for guaranteeing the performance of the diplexer at the Ka‐band channel. Furthermore, working principle, design method and test solution of this proposed K‐/Ka‐band diplexer are well illustrated, and the high‐isolation (>40 dB) in very adjacent wideband channels at K‐band (18–23.5 GHz) and Ka‐band (25.8–31.6 GHz) is achieved within a tiny size of 9 × 4 × 0.87 mm.

A novel design of 4-port diplexer with high isolation

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

A Novel Compact Dual-Band Antenna Array With High Isolations Realized Using the Neutralization Technique

A diplexer antenna with extremely high isolation for co-site duplex applications

A Novel Design for a Planar Microstrip Triple Diplexer With Enhanced Selectivity Using Highly-Selective Bandpass Filters

High Performance Superconducting Common Resonator Diplexer and Analysis Between Isolations and Topologies

High Isolation And Common-Mode Suppression Balanced-To-Balanced Microstrip Diplexer With Mixed Coupling

High-isolation high-temperature superconductive diplexer and design method thereof

High Isolation Substrate Integrated Waveguide Diplexer With Flexible Transmission Zeros

High Isolation Superconducting Diplexer Designed with Double-side Structure

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

A Narrowband Superconducting Quadruplexer with High Isolation

A Compact and High-Isolated Multiresonator-Coupled Diplexer

5G Millimeter-Wave Substrate-Integrated Waveguide Quad-Channel Diplexer With High In-Band and Wideband Isolation

Compact Diplexer with High Isolation and Wide Stopband Based on SIRs

High isolation diplexer design for autonomous vehicle

Design and Rapid Optimization Procedure of a Compact Broadband Microstrip Diplexer for VHF/UHF Band

Miniaturized Single-Ended and Balanced Dual-Band Diplexers Using Dielectric Resonators

Balanced Diplexer Based on Substrate Integrated Waveguide Dual-Mode Resonator

Miniaturised high‐isolation K‐/Ka‐band diplexer with 3D antarafacial channel integration using vertical quasi‐coaxial matching network