Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

High Isolation And Common-Mode Suppression Balanced-To-Balanced Microstrip Diplexer With Mixed Coupling

High Selectivity and CM Suppression Frequency-Dependent Coupling Balanced BPF

High Selective Microstrip Bandpass Filter and Diplexer With Mixed Electromagnetic Coupling

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

High selectivity and common-mode suppression balanced bandpass filter with TM dual-mode SIW cavity

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

Balanced Diplexer Based on Substrate Integrated Waveguide Dual-Mode Resonator

High Selective Microstrip Bandpass Filter and Diplexer with Common Magnetic Coupling

High Performance Superconducting Common Resonator Diplexer and Analysis Between Isolations and Topologies

High Isolation Substrate Integrated Waveguide Diplexer With Flexible Transmission Zeros

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

A novel design of 4-port diplexer with high isolation

A Compact and High-Isolated Multiresonator-Coupled Diplexer

Compact Differential Diplex Filtenna With Common-Mode Suppression for Highly Integrated Radio Frequency Front-Ends

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

Planar wideband balanced-to-balanced microstrip diplexer with reflectionless characteristics

Miniaturized Single-Ended and Balanced Dual-Band Diplexers Using Dielectric Resonators

Compact Dual-Band Dual-Mode SIW Balanced BPF With Intrinsic Common-Mode Suppression

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators