Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

High Selective Microstrip Bandpass Filter and Diplexer With Mixed Electromagnetic Coupling

High Selective Microstrip Bandpass Filter and Diplexer with Common Magnetic Coupling

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

High Isolation And Common-Mode Suppression Balanced-To-Balanced Microstrip Diplexer With Mixed Coupling

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Microstrip/Coplanar Waveguide Hybrid Bandpass Filter With Electromagnetic Coupling

A Compact and High-Isolated Multiresonator-Coupled Diplexer

Compact Microstrip Balanced Bandpass Filter with Adjustable Transmission Zeros

High Selectivity and CM Suppression Frequency-Dependent Coupling Balanced BPF

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Coplanar Waveguide Bandpass Filters with Separated Electric and Magnetic Couplings

A Novel Design for a Planar Microstrip Triple Diplexer With Enhanced Selectivity Using Highly-Selective Bandpass Filters

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory