Abstract:This paper presents the modeling and optimization of a manifold-coupled superconducting quadruplexer at VHF-band. The quadruplexer consists of four individually designed channel filters with a bandwidth of 400 kHz centered at 216, 224, 232, and 240 MHz, respectively, connected to a common manifold. The complex interactions between the channel filters make the design and optimization of the quadruplexer difficult and even impossible. An equivalent circuit for the manifold and the capacitive external couplings of the four channel filters in the quadruplexer is presented. The parameters of the equivalent circuit are accurately extracted from electromagnetic simulations. Afterward, the equivalent circuit is optimized to compensate for the interactions between the channel filters and obtain a good common-port return loss and channel transfer characteristics. Thereafter, the design of the individual channel filters is improved according to the optimized parameters of the equivalent circuit. The superconducting quadruplexer is successfully designed and fabricated. The measurements show high performance and match well with the simulations. The experimental insertion losses of the four channels are less than 0.45 dB, the center frequency discrepancies of the four channels are less than 40 kHz, the common-port return loss is greater than 16.3 dB, and the out-of-band rejection is higher than 90 dB. Moreover, a high isolation greater than 75 dB between the channels is achieved.

A Superconducting Manifold-Coupled Triplexer with an Iterative Design Method at X-Band

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design and Optimization of a Compact Superconducting Quadruplexer at VHF-Band with an Accurate Equivalent Circuit Model

Design and Performance of a Compact Superconducting Duplexer at VHF-band

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

A Narrowband Superconducting Quadruplexer with High Isolation

A D-Band Manifold Triplexer With High Isolation Utilizing Novel Waveguide Dual-Mode Filters

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Tri-band Superconducting Filter Using Stub-Loaded Stepped-Impedance Resonators

Tri-band Superconducting Bandpass Filter with Controllable Passband Specifications

A Novel Tri-Band Superconducting Filter Using Embedded Stub-Loaded Resonators

Design and Optimization of a Superconducting Contiguous Diplexer Comprising Doubly Terminated Filters

Superconducting Ultra-Wideband (UWB) Bandpass Filter Design Based on Quintuple/Quadruple/ Triple-Mode Resonator

Design of high selectivity narrowband eight-order high-temperature superconducting sextaplexer

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio

A wideband superconducting filter at Ku-band based on interdigital coupling

Superconducting Wideband Bandpass Filter Based on Triple-Mode Resonator

Design of Triplexer Using E-Stub-Loaded Composite Right-/Left-Handed Resonators and Quasi-Lumped Impedance Matching Network

Dual‐band Superconducting Bandpass Filter with Embedded Resonator Structure

Compact High-Temperature Superconducting Filter Using Multimode Stub-Loaded Resonator

Compact High-Order Quint-Band Superconducting Band-Pass Filter