Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

High-order Dual-Band Superconducting Filter with Independently Controllable Passbands and Wide Stopband

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Dual‐band Superconducting Bandpass Filter with Embedded Resonator Structure

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure

A Compact Dual-Band Bandpass Superconducting Filter Using Microstrip/CPW Spiral Resonators

Design of a Low-Band Wideband Superconducting Filter Using Triple-Mode Resonator

A Wide Stopband Wideband HTS Filter Using Stepped-Impedance Resonators With an Interdigital Capacitor Structure

Design of a High-Order Dual-Band Superconducting Filter with Controllable Frequencies and Bandwidths

Tri-band Superconducting Bandpass Filter with Controllable Passband Specifications

Compact Superconducting Dual-Band Bandpass Filter by Combining Bandpass and Bandstop Filters

Tri-band Superconducting Filter Using Stub-Loaded Stepped-Impedance Resonators

High-Temperature Superconducting Multimode Dual-Ring UWB Bandpass Filter

Superconducting Wideband Bandpass Filter Based on Triple-Mode Resonator