Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual‐band Superconducting Bandpass Filter with Embedded Resonator Structure

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

High-order Dual-Band Superconducting Filter with Independently Controllable Passbands and Wide Stopband

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Tri-band Superconducting Bandpass Filter with Controllable Passband Specifications

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Design of a High-Order Dual-Band Superconducting Filter with Controllable Frequencies and Bandwidths

Compact Superconducting Dual-Band Bandpass Filter by Combining Bandpass and Bandstop Filters

Tri-band Superconducting Filter Using Stub-Loaded Stepped-Impedance Resonators

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

A Compact Dual-Band Bandpass Superconducting Filter Using Microstrip/CPW Spiral Resonators

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Design of Dual-Mode Dual-Band Superconducting Filters