Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

Design of Dual-Mode Dual-Band Superconducting Filters

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

Dual‐band Superconducting Bandpass Filter with Embedded Resonator Structure

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

A Design Method of Multimode Multiband Bandpass Filters

A Modified Dual-Mode Bandpass Filter Using Inductively Slotted Square Resonator Without Coupling Gaps

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A Compact Dual-Band Bandpass Superconducting Filter Using Microstrip/CPW Spiral Resonators

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio

Design of a High-Order Dual-Band Superconducting Filter with Controllable Frequencies and Bandwidths

High-order Dual-Band Superconducting Filter with Independently Controllable Passbands and Wide Stopband

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure