Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

Hybrid Non-Uniform- Q Lossy Filters with Substrate Integrated Waveguide and Microstrip Resonators

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

A Hybrid Method for Flat-Passband Filter with Nonuniform Q Resonators and Predistortion

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Lossy Filter with Lniform Q-Factors by Optimization Method

A Modified Dual-Mode Bandpass Filter Using Inductively Slotted Square Resonator Without Coupling Gaps

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Lossy filter with uniform Q-factors by optimization method

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of Dual-Mode Dual-Band Superconducting Filters

Compact Quad-Band Bandpass Filter Using Quad-Mode Stepped Impedance Resonator and Multiple Coupling Circuits