Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Lossy filter with uniform Q-factors by optimization method

Lossy Filter with Lniform Q-Factors by Optimization Method

A Hybrid Method for Flat-Passband Filter with Nonuniform Q Resonators and Predistortion

Noununiform Scaling Technique for Parallel-Coupled Pairs Lossy Filters

Hybrid Non-Uniform- Q Lossy Filters with Substrate Integrated Waveguide and Microstrip Resonators

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A filter with equal-ripple negative group delay

A lossy triple-mode microstrip filter with flat passband based on nonuniform Q-factors

A Substrate-Integrated Evanescent-Mode Waveguide Filter with Nonresonating Node in Low-Temperature Co-Fired Ceramic

Absorptive Bandstop Filter with Prescribed Negative Group Delay and Bandwidth

All Passive Realization of Lossy Coupling Matrices Using Resistive Decomposition Technique

Improved Extraction of Coupling Matrix and Unloaded Q from S-Parameters of Lossy Resonator Filters

Comparative Analysis of Out-of-Band Power Handling Capacities for Lossy Filters

Computer-Aided Tuning of Highly Lossy Microwave Filters Using Complex Coupling Matrix Decomposition and Extraction.

Coupling Matrix Extraction Technique for Auto Tuning of Highly Lossy Filters

Diffractive Broadband Coupling into High-Q Resonant Cavities

Frequency selective surface filters with high-quality factors based on a Fano resonance

Synthesis of wide-band bandpass filters with quarter-wavelength resonators

A Flat-Passband Filter with Hybrid Structure of Substrate Integrated Waveguide and Microstrip Resonators Based on Predistorted Nonuniform-Q Method