Abstract:Systematic error in the point diffraction interferometer can significantly influence the measurement accuracy in the case that a high-numerical-aperture spherical surface is tested, in which wavefront aberrations could be observed and cannot be removed with the traditional calibration method. A calibration method, called symmetrical position aberration cancellation (SPAC) method, is proposed to remove the systematic error. With the SPAC method, the calibration needs two separate measurements with interferograms of opposite tilts and the systematic error can be reduced by averaging the test wavefronts of these two measurements. A geometrical optics model is presented for facilitating the calculation of the geometric aberrations that are introduced by the lateral deviation between the curvature center of the test surface and the center of the pinhole. Then a simulation model is built to analyze the influence of the lateral deviation and the numerical aperture of the surface under test on the systematic error. Both the computer simulation and experiments with a point diffraction interferometer (PDI) have been carried out to validate the proposed calibration method. In the final comparative experiment with a ZYGO interferometer, the PDI exhibits high precision in high-numerical-aperture spherical surfaces measurement based on the proposed calibration method. (C) 2015 Optical Society of America

An analysis of the calibration of angle difference in dual-illumination digital holographic interferometry for surface shape measurement

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Investigation of Heterodyne Interferometer Technique for Dynamic Angle Measurement: Error Analysis and Performance Evaluation

Phase-Contrast Imaging Technology with Digital Holographic Microscope Based System Calibration

Error Analysis Of Spherical Ultra-Precision Measurement

Calibrate the Non-Orthogonal Error of AFM with Two-Dimensional Self-Traceable Grating.

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

Digital Calibration Method for Defects Evaluation of Large Fine Optical Surfaces

A New Optical Angle Measurement and Compensation

Calibration Method for High-Accuracy Measurement of Long Focal Length with Talbot Interferometry.

Surface shape measurement by multi-illumination lensless Fourier transform digital holographic interferometry

Multi-Angle Digital Holographic Profilometry for Precision Measurements

Calibration of Circular Division Artifacts Using a Self-Developed Angle Comparator

Analysis of Wavelength Error in Spectral Phase Shifting of Digital Holographic Microscopy

Digital Holographic Metrology Based on Multi-Angle Interferometry.

Sub-Nanometer Misalignment Aberrations Calibration of the Fizeau Interferometer for High-Numerical-Aperture Spherical Surface Ultra-Precision Measurement

Self-calibration of in Situ Monoscopic Deflectometric Measurement in Precision Optical Manufacturing.

Improving the Accuracy of Interferometer Testing with Absolute Surface Calibration and Power Spectral Density Analysis

Calibration Method for Angle Measuring Accuracy of Measuring Angle Device with CCD