Abstract:Inorganic solid electrolytes are one of the key materials instead of organic liquid electrolytes for next-generation all-solid-state batteries (ASSBs). The advantages of ASSBs are long cycle life and high safety due to the non-flammable of the solid electrolyte. The ASSBs can be stacked layer by layer, reducing the volume in battery packaging and resulting in increased energy density. These ASSBs can be applied to wearable or healthcare or smart home devices in the form of multilayer ceramic battery (MLCB), in addition to energy storage devices and electric vehicles. However, the MLCBs are difficult to fabricate due to the high sintering temperature and high interfacial resistance of the solid electrolyte. The Li-based solid electrolytes of NASICON-type have received much attention as prospective solid electrolytes due to their high ionic conductivity and high stability against moisture. Especially, lithium aluminum germanium phosphate (LAGP) is potential solid electrolyte material in the NASICON family due to superior stability. LAGP glass electrolyte was selected to enable sintering at low temperatures and reduce resistance at the interface for the application to MLCB. In this study, a LAGP-based solid electrolyte ceramic sheet was prepared using glass/powder composite at 750 °C. The obtained LAGP-based solid electrolyte exhibited a NASICON-type hexagonal structure and a total ionic conductivity of 1.45 × 10 -4 S/cm at 25 ̊C. A Coin cell with the LAGP composite electrolyte, LiCoO 2 (LCO) as cathode, and Li metal as anode was assembled. The coin cell was charged and discharged by using a battery cycler and the charge capacity was approximately 130 mAh∙g -1 . Additionally, we prepared a LiMnPO 4 glass-based cathode (LMP) using conventional melt quenching techniques and then stacked it layer by layer with the LAGP electrolyte and co-sintered at 650°C. After co-sintering the LAGP/LMP cell, it was confirmed that the interface between the LAGP composite electrolyte and the LMP cathode was well attached, and its ionic conductivity maintained a value similar to that of the LAGP composite electrolyte. Subsequently, an electrochemical analysis of the LAGP/LMP cell was performed.

A new nanostructured γ-Li3PO4/GeO2 composite for all-solid-state Li-ion battery applications

PEO/garnet Composite Electrolytes for Solid-State Lithium Batteries: from “Ceramic-in-polymer” to “Polymer-in-ceramic”

Morphology-controlled synthesis of novel nanostructured Li4P2O7 with enhanced Li-ion conductivity for all-solid-state battery applications

In situ polymerization of 1,3-dioxolane infiltrating 3D garnet framework with high ionic conductivity and excellent interfacial stability for integrated solid-state Li metal battery

Solid-State Li-Ion Batteries Using Fast, Stable, Glassy Nanocomposite Electrolytes for Good Safety and Long Cycle-Life

Electrochemical Performance of All-Solid-state Lithium Batteries Using Inorganic Lithium Garnets Particulate Reinforced PEO/LiClO4 Electrolyte

Preparation and chemical compatibility of lithium aluminum germanium phosphate solid electrolyte

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Improved Li‐Ion Conduction and (Electro)Chemical Stability at Garnet‐Polymer Interface through Metal‐Nitrogen Bonding

Synthesis of Electrospun NASICON Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 Solid Electrolyte Nanofibers by Control of Germanium Hydrolysis

Co-Sintering of Lithium Aluminum Germanium Phosphate (LAGP) Glass/Powder Composite Electrolyte for Multilayer Ceramic Batteries

Rechargeable Solid-State Lithium Metal Batteries with Vertically Aligned Ceramic Nanoparticle/polymer Composite Electrolyte

Unlocking the concentration polarization for Solid-State lithium metal batteries

Stable Li|LAGP Interface Enabled by Confining Solvate Ionic Liquid in a Hyperbranched Polyanionic Copolymer for NASICON-Based Solid-State Batteries

Nano-Structured Li1.3al0.3ti1.7(Po4)3 Coated Licoo2 Enabling Compatible Interface with Ultrathin Garnet-Based Solid Electrolyte for Stable Li Metal Battery

Lithium Batteries: Solvent‐Free Synthesis of Thin, Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries (adv. Energy Mater. 12/2020)

Solvent‐Free Synthesis of Thin, Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Li4-xGe1-xPxO4 a potential solid-state electrolyte for all-oxide microbatteries

Li+ Conduction in a Polymer/Li1.5Al0.5Ge1.5(PO4)3 Solid Electrolyte and Li-Metal/Electrolyte Interface

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework