Abstract:Densified LLZTO electrolytes are synthesized using Li2O and Li2ZrO3 precursors via a 60‐second Joule heat‐assisted process. A Sn‐SnF2 coating, produced by melt‐quenching, forms a Li‐Sn alloy and LiF interlayer in situ, achieving near‐zero interfacial resistance and a critical current density of 23 mA cm–2. Solid‐state batteries with modified LLZTO and NMC811 cathodes retain 88.63% capacity after 3000 cycles. Garnet‐type Li6.5La3Zr1.5Ta0.5O12 (LLZTO) solid electrolytes provide the necessary electrochemical stability and ionic conductivity for solid‐state lithium‐metal batteries (SSLMBs). However, their wider application is hindered by their high interfacial resistance with electrodes and a lengthy synthesis process. This study presents the synthesis of densified LLZTO electrolytes using unconventional Li2O and Li2ZrO3 precursors through an ultrafast (≈60 s) Joule heat‐assisted synthesis approach in a single‐step process. The lower sintering temperature of Li2ZrO3 compared to traditional ZrO2 precursor yields LLZTO with larger grains, resulting in enhanced Li+ conductivity (7.0 × 10−4 S cm−1 at 25 °C), reduced electronic conductivity (1.7 × 10−10 S cm−1), and higher density (94.2%). Applying a 52–80 nm Sn:SnF2 coating on the LLZTO surface using a melt‐quenching approach produces a uniform interlayer that chemically converts to Li‐Sn alloy and LiF upon contact with lithium, resulting in a near‐zero interfacial resistance and a critical current density of 4.2 mA cm−2 at 25 °C. The SSLMBs, incorporating Sn:SnF2‐coated LLZTO electrolyte with NMC811 cathode, demonstrate remarkable initial capacity (181.1 mAh g−1) and cycle performance (88.63% capacity retention at 3000th cycle). The results indicate that this approach has the potential to advance the commercial fabrication technology for high‐performance solid electrolytes for SSLMBs.

Solvent‐Free Synthesis of Thin, Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries

Lithium Batteries: Solvent‐Free Synthesis of Thin, Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries (adv. Energy Mater. 12/2020)

Li6.75La3Zr1.75Ta0.25O12@amorphous Li3OCl composite electrolyte for solid state lithium-metal batteries

Enabling lithium metal battery with flexible polymer/garnet type solid oxide composite electrolyte

Electrochemical Performance of All-Solid-state Lithium Batteries Using Inorganic Lithium Garnets Particulate Reinforced PEO/LiClO4 Electrolyte

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework

Built-in garnet-rich composite solid electrolyte towards fast ion transport and dendrite-free for high-energy lithium batteries

Ultrafast One‐Step Synthesis of Garnet‐Type Solid Electrolytes With Modified Surface and Microstructure for Solid‐State Lithium‐Metal Batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

PEO/garnet Composite Electrolytes for Solid-State Lithium Batteries: from “Ceramic-in-polymer” to “Polymer-in-ceramic”

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

Synergistically enabling the interface stability of lithium metal batteries with soft ionic gel and garnet-type Li6.4La3Zr1.4Ta0.6O12 ceramic filler

Composite solid electrolytes containing single-ion lithium polymer grafted garnet for dendrite-free, long-life all-solid-state lithium metal batteries

Rational design of ultrathin composite solid-state electrolyte for high-performance lithium metal batteries

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Garnet-Based Solid-State Lithium Fluoride Conversion Batteries Benefiting from Eutectic Interlayer of Superior Wettability

Garnet-rich Composite Solid Electrolytes for Dendrite-Free, High-Rate, Solid-State Lithium-Metal Batteries