Abstract:Lithium-sulfur (Li-S) batteries have become candidate for the next-generation energy storage systems because of their high energy density and specific capacity. However, due to the shuttle effect of polysulfides and the safety problems caused by liquid organic electrolytes, practical commercial applications of Li-S battery have been severely limited. With the recent development of solid electrolyte, the strategy of replacing liquid electrolyte with the solid electrolyte has aroused extensive attention, which can both improve the safety of the battery and increase its energy density. However, in the absence of liquid components, poor interfacial contact and low ionic conductivity for solid electrolyte can seriously impair the electrochemical performance of solid-state Li-S batteries. By adding a certain amount of liquid plasticizer, the ionic conductivity is effectively ameliorated and the interface contact between the electrodes and the electrolyte is largely improved. Herein, a thermally polymerized composite gel polymer electrolyte (CPE) for quasi-solid-state Li-S battery is designed and fabricated. The CPE has a satisfactory ionic conductivity and wide electrochemical window of above 4.5 V. Especially, the addition of the garnet Li6.5La3Zr1.5Ta0.5O12 (LLZTO) powder improves the flame retardancy and thermal stability. In addition, the application of CPE in the Li-S battery can block the shuttle of polysulfide to some extent, and the quasi-solid-state Li-S battery assembled by CPE shows the good electrochemical performance and only a 0.22% decay per cycle in 200 cycles with 0.1C. Hence, this work provides a new strategy for design and development of the quasi-solid-state electrolyte for the application of Li-S battery. Moreover, due to its wide electrochemical window, CPE can also be applied in high-voltage cathode systems of lithium ion battery in the future.

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Hybridizing poly(vinylidene fluoride-co-hexafluoropropylene) with Li6.5La3Zr1.5Ta0.5O12 as a lithium-ion electrolyte for solid state lithium metal batteries

A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

Synergistic Coupling Between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene Fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes

Enabling lithium metal battery with flexible polymer/garnet type solid oxide composite electrolyte

PVDF-HFP/LiTFSI based composite solid state electrolyte with different micromorphology of Li6.25Ga0.25La3Zr2O12 doping

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

A Sandwich Structure Composite Solid Electrolyte with Enhanced Interface Stability and Electrochemical Properties For Solid-state Lithium Batteries

Constructing a PVDF-based composite solid-state electrolyte with high ionic conductivity Li6.5La3Zr1.5Ta0.1Nb0.4O12 for lithium metal battery

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Preparation and Study of Poly(Vinylidene Fluoride-Co-Hexafluoropropylene)-Based Composite Solid Electrolytes

Sandwich structured PVDF-HFP-based composite solid electrolytes for solid-state lithium metal batteries

Porous Composite Gel Polymer Electrolyte with Interfacial Transport Pathways for Flexible Quasi Solid Lithium-Ion Batteries.

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

Preparation and performances of the modified gel composite electrolyte for application of quasi-solid-state lithium sulfur battery