Abstract:High-performance all-solid-state lithium-metal batteries (ASSLMBs) require solid electrolytes displaying high electrochemical stability, high ion conductivity, a high lithium transference number, excellent compatibility with the electrodes, and the ability to work at room temperature. In this study, we used a solution-casting technique to prepare a flexible composite polymer electrolyte (CPE) having a high lithium transference number and applied it within ASSLMBs. The CPE comprised a poly(vinyl alcohol) (PVA)/poly(4-lithium styrene sulfonic acid) (PLSS) blend with an Al-doped Li7La3Zr2O12 (LLZO) filler sandwiched on both sides by poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) skin layers. The PVDF-HFP-LiTFSI skin layers not only lowered the interfacial resistance between the electrodes and the sandwich-CPE electrolyte but also suppressed lithium dendrite growth. The sandwich-CPE membrane exhibited high ionic conductivity (3.82 × 10–4 S cm–1) and a high lithium transference number (0.776) at room temperature. A CR2032 coin cell having the structure Li/sandwich-CPE/ delivered excellent rate performance and cycle stability (discharge capacity of 130.55 mA h g–1 with 85.63% capacity retention after 100 cycles at a rate of 0.5C at room temperature). A pouch cell having the structure Li/sandwich-CPE/ achieved a discharge capacity of 18.1 mA h with a capacity retention of 90.46% after 30 cycles at 0.2C at room temperature. This strategy for fabricating sandwich-CPE structures has potential for application in the preparation of high-voltage cathodes for ASSLMBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01333.Particle size and SEM image of the commercial Al-doped LLZO, Taylor flow reactor (TFR), XRD patterns of the precursor and molybdenum-modified NCM811, XPS survey spectra of the pristine and molybdenum-modified T-LNCM811, EDX mapping results of Li2MoO4-modified LNCM81 and CPE components, thermal stability and mechanical strength of the sandwich-CPE, impedance spectra of CPEs, plating/stripping performance of the sandwich-CPE, post-mortem analysis of symmetry cells and the cathode, structure of the pouch cell, demonstrating the operation of an all-solid-state pouch lithium-metal battery (PDF)This article has not yet been cited by other publications.

Sandwich structured PVDF-HFP-based composite solid electrolytes for solid-state lithium metal batteries

Sandwich-Structured Composite Polymer Electrolyte Based on PVDF-HFP/PPC/Al-Doped LLZO for High-Voltage Solid-State Lithium Batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

Hybridizing poly(vinylidene fluoride-co-hexafluoropropylene) with Li6.5La3Zr1.5Ta0.5O12 as a lithium-ion electrolyte for solid state lithium metal batteries

A Sandwich Structure Composite Solid Electrolyte with Enhanced Interface Stability and Electrochemical Properties For Solid-state Lithium Batteries

Composite Polymer Electrolyte with Vertically Aligned Garnet Scaffolds for Quasi Solid-State Lithium Batteries

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

A Three-Dimensional Electrospun Li6.4La3Zr1.4Ta0.6O12–Poly (Vinylidene Fluoride-Hexafluoropropylene) Gel Polymer Electrolyte for Rechargeable Solid-State Lithium Ion Batteries

PVDF-HFP-Based Composite Electrolyte Membranes having High Conductivity and Lithium-Ion Transference Number for Lithium Metal Batteries

High-performance sandwiched hybrid solid electrolytes by coating polymer layers for all-solid-state lithium-ion batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Preparation and Study of Poly(Vinylidene Fluoride-Co-Hexafluoropropylene)-Based Composite Solid Electrolytes

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

PVDF-HFP/LiTFSI based composite solid state electrolyte with different micromorphology of Li6.25Ga0.25La3Zr2O12 doping

PVDF-HFP/SiO2 Composite Solid Electrolyte Enhanced by Supramolecular Self-Assembly of Cyclodextrin

A Sandwich-Structure Composite Polymer Electrolyte Based on Poly(vinyl alcohol)/Poly(4-lithium styrene sulfonic acid) for High-Voltage Lithium Batteries

High-stability double-layer polymer–inorganic composite electrolyte fabricated through ultraviolet curing process for solid-state lithium metal batteries

Combining Organic Plastic Salts with a Bicontinuous Electrospun PVDF-HFP/Li7La3Zr2O12 Membrane: LiF-Rich Solid-Electrolyte Interphase Enabling Stable Solid-State Lithium Metal Batteries.

Incorporation of Poly(Ionic Liquid) with PVDF-HFP-Based Polymer Electrolyte for All-Solid-State Lithium-Ion Batteries