Abstract:High-performance all-solid-state lithium-metal batteries (ASSLMBs) require solid electrolytes displaying high electrochemical stability, high ion conductivity, a high lithium transference number, excellent compatibility with the electrodes, and the ability to work at room temperature. In this study, we used a solution-casting technique to prepare a flexible composite polymer electrolyte (CPE) having a high lithium transference number and applied it within ASSLMBs. The CPE comprised a poly(vinyl alcohol) (PVA)/poly(4-lithium styrene sulfonic acid) (PLSS) blend with an Al-doped Li7La3Zr2O12 (LLZO) filler sandwiched on both sides by poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) skin layers. The PVDF-HFP-LiTFSI skin layers not only lowered the interfacial resistance between the electrodes and the sandwich-CPE electrolyte but also suppressed lithium dendrite growth. The sandwich-CPE membrane exhibited high ionic conductivity (3.82 × 10–4 S cm–1) and a high lithium transference number (0.776) at room temperature. A CR2032 coin cell having the structure Li/sandwich-CPE/ delivered excellent rate performance and cycle stability (discharge capacity of 130.55 mA h g–1 with 85.63% capacity retention after 100 cycles at a rate of 0.5C at room temperature). A pouch cell having the structure Li/sandwich-CPE/ achieved a discharge capacity of 18.1 mA h with a capacity retention of 90.46% after 30 cycles at 0.2C at room temperature. This strategy for fabricating sandwich-CPE structures has potential for application in the preparation of high-voltage cathodes for ASSLMBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01333.Particle size and SEM image of the commercial Al-doped LLZO, Taylor flow reactor (TFR), XRD patterns of the precursor and molybdenum-modified NCM811, XPS survey spectra of the pristine and molybdenum-modified T-LNCM811, EDX mapping results of Li2MoO4-modified LNCM81 and CPE components, thermal stability and mechanical strength of the sandwich-CPE, impedance spectra of CPEs, plating/stripping performance of the sandwich-CPE, post-mortem analysis of symmetry cells and the cathode, structure of the pouch cell, demonstrating the operation of an all-solid-state pouch lithium-metal battery (PDF)This article has not yet been cited by other publications.

High-performance sandwiched hybrid solid electrolytes by coating polymer layers for all-solid-state lithium-ion batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Sandwich-Structured Composite Polymer Electrolyte Based on PVDF-HFP/PPC/Al-Doped LLZO for High-Voltage Solid-State Lithium Batteries

Sandwich structured PVDF-HFP-based composite solid electrolytes for solid-state lithium metal batteries

A Sandwich Structure Composite Solid Electrolyte with Enhanced Interface Stability and Electrochemical Properties For Solid-state Lithium Batteries

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Composite Polymer Electrolyte with Vertically Aligned Garnet Scaffolds for Quasi Solid-State Lithium Batteries

Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries

PVDF-HFP/SiO2 Composite Solid Electrolyte Enhanced by Supramolecular Self-Assembly of Cyclodextrin

Hybrid Crosslinked Solid Polymer Electrolyte via In‐Situ Solidification Enables High‐Performance Solid‐State Lithium Metal Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Layer-Structured Composite Solid-State Electrolyte with a Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 -Coated Separator for High-Voltage Lithium Metal Batteries by In Situ Polymerization

A Sandwich-Structure Composite Polymer Electrolyte Based on Poly(vinyl alcohol)/Poly(4-lithium styrene sulfonic acid) for High-Voltage Lithium Batteries

A Heterogeneous Quasi-solid-State Hybrid Electrolyte Constructed from Electrospun Nanofibers Enables Robust Electrode/Electrolyte Interfaces for Stable Lithium Metal Batteries

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

In Situ Gelation of a 1,3-Dioxolane Dual-Permeable Porous Tandem Framework with Excellent Interfacial Stability to Power Long-Cycling Solid-State Lithium Metal Batteries

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries