Abstract:All solid-state lithium metal batteries are viewed as a potential next-generation energy storage technology due to their high energy density and better safety performance. The study on solid-state electrolytes (SSE) is of crucial importance for the development of technology in this field. Here, we develop a solvent-free preparation and matrix modification process for all-solid-state composite electrolytes (CSEs) based on the blended PVDF-HFP/PEO polymer matrix, and systematically study the effects of the solvent-free process on their properties. The results show that the solvent-free PVDF-HFP/PEO/10 wt % LLZTO solid-state electrolytes (1:1 mass ratio blended polymer matrix) combine the electrochemical and mechanical advantages of both polymers, thus-prepared electrolytes perform excellent tensile strength and ductility (over 500% strain for polymer matrix as well as 170% strain and 4.78 MPa strength for CSEs), and the ionic conductivity can reach ∼6.2 × 10–4 S·cm–1 at 80 °C. At the same time, the electrochemical stability and cycle stability of the electrolytes are enhanced due to the optimized process. The discoloration reaction of PVDF-HFP in composite electrolytes is further studied in this work as well. In addition to excellent performance, the simple process based on the solvent-free method also lays the foundation for scale-up production.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02566.EDS, FT-IR spectra, DSC curves, σ – (1/T) plots, LSV curves, Nyquist plots, photographs, and specific capacity–cycle performance (PDF)This article has not yet been cited by other publications.

Lithium Batteries: Solvent‐Free Synthesis of Thin, Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries (adv. Energy Mater. 12/2020)

Solvent‐Free Synthesis of Thin, Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

PEO/garnet Composite Electrolytes for Solid-State Lithium Batteries: from “Ceramic-in-polymer” to “Polymer-in-ceramic”

Solvent-Free and Long-Cycling Garnet-Based Lithium-Metal Batteries

Lithium‐Ion Batteries: Flexible Composite Solid Electrolyte Facilitating Highly Stable “soft Contacting” Li–Electrolyte Interface for Solid State Lithium‐Ion Batteries (adv. Energy Mater. 22/2017)

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery

Garnet-rich Composite Solid Electrolytes for Dendrite-Free, High-Rate, Solid-State Lithium-Metal Batteries

A Comparatively Low Cost, Easy-To-Fabricate, and Environmentally Friendly PVDF/Garnet Composite Solid Electrolyte for Use in Lithium Metal Cells Paired with Lithium Iron Phosphate and Silicon

Garnet-based solid lithium metal batteries with ultralong lifespan enabled by solvent-free trifluoroacetic acid-induced interfacial engineering

Electrochemical Performance of All-Solid-state Lithium Batteries Using Inorganic Lithium Garnets Particulate Reinforced PEO/LiClO4 Electrolyte

Built-in garnet-rich composite solid electrolyte towards fast ion transport and dendrite-free for high-energy lithium batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Unlocking the concentration polarization for Solid-State lithium metal batteries

Enabling lithium metal battery with flexible polymer/garnet type solid oxide composite electrolyte

A new nanostructured γ-Li3PO4/GeO2 composite for all-solid-state Li-ion battery applications

Garnet-Type Composite Polymer Electrolyte for Room-Temperature All-Solid-State Li–S Battery

Solvent-Free Process for Blended PVDF-HFP/PEO and LLZTO Composite Solid Electrolytes with Enhanced Mechanical and Electrochemical Properties for Lithium Metal Batteries

Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries

An in situ-formed high lithiophilic solid lubricant interface layer for garnet-based solid-state lithium metal batteries

8.5 μm‐Thick Flexible‐Rigid Hybrid Solid–Electrolyte/Lithium Integration for Air‐Stable and Interface‐Compatible All‐Solid‐State Lithium Metal Batteries (Adv. Energy Mater. 24/2022)