Abstract:Lithium metal is considered as one of the most promising anode candidates for high-energy batteries [1-3]. However, safety concerns induced by the formation of Li dendrites largely hinder the practical application of lithium-metal batteries [4]. It is anticipated that the use of non-flammable inorganic solid-state electrolytes can resolve these safety issues [5], but solid ceramic electrolytes generally suffer from poor physical contact with the electrode and poor electro-/chemical stability at the electrolyte|electrode interface [6]. Herein, we report on a thin and flexible hybrid electrolyte composed of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 (LATP), a polymer binder, and a small amount of an ionic liquid-based electrolyte. To reinforce the interfacial stability between LATP and Li, we coat an ultrathin polysiloxane-based single-ion conducting polymer (PSiO) on the Li metal surface via a simple dip-coating method. The implementation of PSiO-coated Li (PSiO@Li) in symmetric PSiO@Li||PSiO@Li cells enables a substantial extension of the cycle life, yielding >2,000 h of stable lithium stripping-plating. The full-cells comprising PSiO@Li as the negative electrode, LiNi0.88Co0.09Mn0.03O2 (NCM88) as the positive electrode active material, and the aforementioned hybrid electrolyte exhibit substantially enhanced rate capability at high dis-/charge rates above 0.5C and greatly prolonged cycle life at 1C. The superior performance achieved herein is mainly attributed to: (1) the prevented direct contact between LATP and Li, thus avoiding the reduction of LATP and the formation of mixed ion-electron conducting interphases; (2) the regulated Li+ flux at the electrode|electrolyte interface, ensuring homogeneous Li+ stripping-plating; and (3) the promoted intimate contact between PSiO and Li via the formation of Si−O−Li bonds. References [1] T. Li, X.-Q. Zhang, P. Shi, Q. Zhang, Joule, 3 (2019) 2647-2661. [2] B. Horstmann, J. Shi, R. Amine, M. Werres, X. He, H. Jia, F. Hausen, I. Cekic-Laskovic, S. Wiemers-Meyer, J. Lopez, D. Galvez-Aranda, F. Baakes, D. Bresser, C.-C. Su, Y. Xu, W. Xu, P. Jakes, R.-A. Eichel, E. Figgemeier, U. Krewer, J.M. Seminario, P.B. Balbuena, C. Wang, S. Passerini, Y. Shao-Horn, M. Winter, K. Amine, R. Kostecki, A. Latz, Energy Environ. Sci., 14 (2021) 5289-5314. [3] S. Wang, P. Xiong, J. Zhang, G. Wang, Energy Storage Materials, 29 (2020) 310-331. [4] Z. Yu, Y. Cui, Z. Bao, Cell Rep. Phy. Sci., 1 (2020) 100119. [5] S. Xin, Y. You, S. Wang, H.-C. Gao, Y.-X. Yin, Y.-G. Guo, ACS Energy Lett., 2 (2017) 1385-1394. [6] A. Banerjee, X. Wang, C. Fang, E.A. Wu, Y.S. Meng, Chem. Rev., 120 (2020) 6878-6933.

Nano-Structured Li1.3al0.3ti1.7(Po4)3 Coated Licoo2 Enabling Compatible Interface with Ultrathin Garnet-Based Solid Electrolyte for Stable Li Metal Battery

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

LATP-coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode with Compatible Interface with Ultrathin PVDF-reinforced PEO-LLZTO Electrolyte for Stable Solidstate Lithium Batteries

LATP-coated LiNi0.8Co0.1Mn0.1O2 cathode with compatible interface with ultrathin PVDF-reinforced PEO-LLZTO electrolyte for stable solid-state lithium batteries

Tailoring of Li/LATP-PEO Interface via a Functional Organic Layer for High-Performance Solid Lithium Metal Batteries

Double-layer Solid-State Electrolyte Enables Compatible Interfaces for High-Performance Lithium Metal Batteries

Covalent Organic Frameworks Interfacial Modification of Ceramic Electrolytes for Enhanced Electrochemical Performance

Stable Interface Between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer

All Solid-State Li/LLZO/LCO Battery Enabled by Alumina Interfacial Coating

High-performance PEO-based solid-state LiCoO2 lithium metal battery enabled by poly(acrylic acid) artificial cathode electrolyte interface

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Constructing Robust LiF‐Enriched Interfaces in High‐Voltage Solid‐State Lithium Batteries Utilizing Tailored Oriented Ceramic Fiber Electrolytes

Garnet-type oxide electrolyte with novel porous-dense bilayer configuration for rechargeable all-solid-state lithium batteries

Reinforcing the Li|Li1.3Al0.3Ti1.7(PO4)3 Interfacial Stability by an Ultrathin Multifunctional Polysiloxane-Based Single-Ion Conducting Polymer

Polydopamine Coated Lithium Lanthanum Titanate in Bilayer Membrane Electrolytes for Solid Lithium Batteries

Engineering and regulating the interfacial stability between Li1.3Al0.3Ti1.7(PO4)3-based solid electrolytes and lithium metal anodes for solid-state lithium batteries

Stabilizing LATP Electrolyte Interface of All-Solid-State Lithium Ion Batteries Consisting of High-Voltage Cathode

Scale-up Processing of a Safe Quasi-Solid-state Lithium Battery by Cathode-Supported Solid Electrolyte Coating

Ultrathin single-ion conducting polymer enabling a stable Li|Li1.3Al0.3Ti1.7(PO4)3 interface

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

Ultrastable Anode/Electrolyte Interface in Solid-State Lithium-Metal Batteries Using LiCu x Nanowire Network Host