Abstract:Inorganic solid electrolytes are one of the key materials instead of organic liquid electrolytes for next-generation all-solid-state batteries (ASSBs). The advantages of ASSBs are long cycle life and high safety due to the non-flammable of the solid electrolyte. The ASSBs can be stacked layer by layer, reducing the volume in battery packaging and resulting in increased energy density. These ASSBs can be applied to wearable or healthcare or smart home devices in the form of multilayer ceramic battery (MLCB), in addition to energy storage devices and electric vehicles. However, the MLCBs are difficult to fabricate due to the high sintering temperature and high interfacial resistance of the solid electrolyte. The Li-based solid electrolytes of NASICON-type have received much attention as prospective solid electrolytes due to their high ionic conductivity and high stability against moisture. Especially, lithium aluminum germanium phosphate (LAGP) is potential solid electrolyte material in the NASICON family due to superior stability. LAGP glass electrolyte was selected to enable sintering at low temperatures and reduce resistance at the interface for the application to MLCB. In this study, a LAGP-based solid electrolyte ceramic sheet was prepared using glass/powder composite at 750 °C. The obtained LAGP-based solid electrolyte exhibited a NASICON-type hexagonal structure and a total ionic conductivity of 1.45 × 10 -4 S/cm at 25 ̊C. A Coin cell with the LAGP composite electrolyte, LiCoO 2 (LCO) as cathode, and Li metal as anode was assembled. The coin cell was charged and discharged by using a battery cycler and the charge capacity was approximately 130 mAh∙g -1 . Additionally, we prepared a LiMnPO 4 glass-based cathode (LMP) using conventional melt quenching techniques and then stacked it layer by layer with the LAGP electrolyte and co-sintered at 650°C. After co-sintering the LAGP/LMP cell, it was confirmed that the interface between the LAGP composite electrolyte and the LMP cathode was well attached, and its ionic conductivity maintained a value similar to that of the LAGP composite electrolyte. Subsequently, an electrochemical analysis of the LAGP/LMP cell was performed.

Preparation and chemical compatibility of lithium aluminum germanium phosphate solid electrolyte

Preparation and Electrochemical Properties of Li1+xAlxGe2-x(PO4)3Synthesized by a Sol-Gel Method

Electrochemical stability of a NASICON solid electrolyte from the lithium aluminum germanium phosphate (LAGP) series

Preparation and ionic conduction of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte using inorganic germanium as precursor

Germanium Thin Film Protected Lithium Aluminum Germanium Phosphate for Solid‐State Li Batteries

Low-cost and facile synthesis of LAGP solid state electrolyte via a co-precipitation method

A new nanostructured γ-Li3PO4/GeO2 composite for all-solid-state Li-ion battery applications

Co-Sintering of Lithium Aluminum Germanium Phosphate (LAGP) Glass/Powder Composite Electrolyte for Multilayer Ceramic Batteries

Synthesis of Electrospun NASICON Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 Solid Electrolyte Nanofibers by Control of Germanium Hydrolysis

Melt-casted Li1.5Al0.3Mg0.1Ge1.6(PO4)3 glass ceramic electrolytes: A comparative study on the effect of different oxide doping

Stable Li|LAGP Interface Enabled by Confining Solvate Ionic Liquid in a Hyperbranched Polyanionic Copolymer for NASICON-Based Solid-State Batteries

Stabilization of NASICON-Type Electrolyte against Li Anode via an Ionic Conductive MOF-Incorporated Adhesive Interlayer

Importance of substrate materials for sintering Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte

PVDF-HFP/LiTFSI based composite solid state electrolyte with different micromorphology of Li6.25Ga0.25La3Zr2O12 doping

High Li+ Conductivity of Li1.3+xAl0.3−xMgxTi1.7(PO4)3 with Hybrid Solid Electrolytes for Solid‐State Lithium Batteries

Enabling superior electrochemical performances of Li10SnP2S12-based all-solid-state batteries using lithium halide electrolytes

Understanding The Reactivity Of A Thin Li1.5al0.5ge1.5(Po4)(3)Solid-State Electrolyte Toward Metallic Lithium Anode

Li+ Conduction in a Polymer/Li1.5Al0.5Ge1.5(PO4)3 Solid Electrolyte and Li-Metal/Electrolyte Interface

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

Synthesis, Microstructure and Ionic Conductivity of Li1+xAlxTi2−x(PO4)3-based Composite Ceramic Electrolyte

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries