Abstract:In the rapidly developing Internet of Things (IoT) applications, how to achieve rapid identification of massive devices and secure the communication of wireless data based on low cost and low power consumption is the key problem to be solved urgently. This paper proposes a novel true random number generator (TRNG) based on ADC nonlinear effect and chaotic map, which can be implemented by traditional processors with built-in ADCs, such as MCU, DSP, ARM, and FPGA. The processor controls the ADC to sample the changing input signal to obtain the digital signal DADC and then extracts some bits of DADC to generate the true random number (TRN). At the same time, after a delay based on DADC, the next time ADC sampling is carried out, and the cycle continues until the processor stops generating the TRN. Due to the nonlinear effect of ADC, the DADC obtained from each sampling is stochastic, and the changing input signal will sharply change the delay time, thus changing the sampling interval (called random interval sampling). As the input signal changes, DADC with strong randomness is obtained. The whole operation of the TRNG resembles a chaotic map, and this method also eliminates the pseudorandom property of chaotic map by combining the variable input signal (including noise) with the nonlinear effect of ADC. The simulation and actual test data are verified by NIST, and the verification results show that the random numbers generated by the proposed method have strong randomness and can be used to implement TRNG. The proposed TRNG has the advantages of low cost, low power consumption, and strong compatibility, and the rate of generating true random number is more than 1.6 Mbps (determined by ADC sampling rate and processor frequency), which is very suitable for IoT sensor devices for security encryption algorithms and anticollision.

A High-Speed and High-Reliability TRNG Based on Analog RRAM for IoT Security Application

A High-performance and Calibration-free True Random Number Generator Based on the Resistance Perturbation in RRAM Array

Implementation of A Chaos-Based ,High-Speed Truly Random Number Generator

A 144-fJ/Bit Reliable and Compact TRNG Based on the Diffusive Resistance of 3-D Resistive Random Access Memory

A RRAM-Based True Random Number Generator with 2T1R Architecture for Hardware Security Applications

A Unified PUF and TRNG Design Based on 40-Nm RRAM with High Entropy and Robustness for IoT Security

A 3.3-Mbit/s True Random Number Generator Based on Resistive Random Access Memory

A Small Area And Low Power True Random Number Generator Using Write Speed Variation Of Oxide-Based Rram For Iot Security Application

A Unified Memory and Hardware Security Module Based on the Adjustable Switching Window of Resistive Memory

A High-Speed True Random Number Generator Based on Unified Selector-RRAM

High-speed true random number generation based on paired memristors for security electronics.

A Novel TRNG Based on Traditional ADC Nonlinear Effect and Chaotic Map for IoT Security and Anticollision

A Low Cost and High Reliability True Random Number Generator Based on Resistive Random Access Memory

A 2.22 Mb/s True Random Number Generator Based on a GeTe x Ovonic Threshold Switching Memristor

A 28NM Integrated True Random Number Generator Harvesting Entropy from MRAM

A 2.22 Mb/s True Random Number Generator Based on a GeTex Ovonic Threshold Switching Memristor

Robust True Random Number Generator Using Stochastic Short-term Recovery of Charge Trapping FinFET for Advanced Hardware Security

A Novel Oscillator-Based TRNG for Smart IC Card.

Amorphous Indium–gallium–zinc–oxide Memristor Arrays for Parallel True Random Number Generators

RHS-TRNG: A Resilient High-Speed True Random Number Generator Based on STT-MTJ Device

D-RaNGe: Using Commodity DRAM Devices to Generate True Random Numbers with Low Latency and High Throughput