Abstract:Recently, the resistance variability of Resistive Random Access Memory (RRAM) based array has been exploited to design a weak Physical Unclonable Function (PUF) for the cryptographic key generation. Generally, memory-based PUF is weak PUF as the challenge-response pair (CRP) space is limited by the memory capacity. In this work, we propose a design of RRAM based strong PUF for device authentication by employing Secure Hash Algorithm (SHA). The key idea is to split the challenge bits into two segments. The first segment is fed into the RRAM array and the output of the RRAM array is mixed with the second segment as the input to the SHA module, thereby significantly increasing the CRP space. To analyze the properties of the proposed strong PUF such as uniqueness and reliability, the resistance variability is experimentally measured from the fabricated 1 kb HfO2 based RRAM arrays, and the read current distribution is then modeled. The simulation shows that when the number of bits from RRAM is larger than 8 bits, the proposed PUF can present good uniqueness. In order to achieve higher security against PUF modeling attack, however, more bits from RRAM array should be feed into SHA module. With 32-bit from RRAM array, it could achieve average uniqueness ~49.95%, uniformity of `1's ~49.81%, diffusiveness ~49.97% with tight distributions. The use of SHA imposes a strict requirement on the reliability, thus multiple RRAM cells are grouped and used to statistically minimize the risk of early retention failure of a single cell. On the other hand, the use of SHA provides a strong resistance against the machine learning attack as demonstrated through 3-layer multi-layer perceptron (MLP) modeling.

A Small Area And Low Power True Random Number Generator Using Write Speed Variation Of Oxide-Based Rram For Iot Security Application

A Novel PUF Using Stochastic Short-Term Memory Time of Oxide-Based RRAM for Embedded Applications

A High-Speed and High-Reliability TRNG Based on Analog RRAM for IoT Security Application

A Unified PUF and TRNG Design Based on 40-Nm RRAM with High Entropy and Robustness for IoT Security

A Physically Unclonable Function with BER < 0.35% for Secure Chip Authentication Using Write Speed Variation of RRAM.

A Unified Memory and Hardware Security Module Based on the Adjustable Switching Window of Resistive Memory

A Low Cost and High Reliability True Random Number Generator Based on Resistive Random Access Memory

A High-performance and Calibration-free True Random Number Generator Based on the Resistance Perturbation in RRAM Array

A Highly Reliable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source

Optimization of Rram-Based Physical Unclonable Function with A Novel Differential Read-Out Method

A RRAM-Based True Random Number Generator with 2T1R Architecture for Hardware Security Applications

A 28nm 512kb Adjacent 2T2R RRAM PUF with Interleaved Cell Mirroring and Self-Adaptive Splitting for Extremely Low Bit Error Rate of Cryptographic Key.

A High-Speed True Random Number Generator Based on Unified Selector-RRAM

A 28 nm 512 Kb adjacent 2T2R RRAM PUF with interleaved cell mirroring and self-adaptive splitting for high density and low BER cryptographic key in IoT devices

A High Area-Efficiency RRAM-Based Strong PUF with Multi-Entropy Source and Configurable Double-Read Process

25.2 A Reconfigurable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source with <6×10−6 Native Bit Error Rate

Design and optimization of strong Physical Unclonable Function (PUF) based on RRAM array

A 3.3-Mbit/s True Random Number Generator Based on Resistive Random Access Memory

Exploiting resistive cross-point array for compact design of physical unclonable function

Extending 1kb RRAM array from weak PUF to strong PUF by employment of SHA module

Building Secure SRAM PUF Key Generators on Resource Constrained Devices