Unique Buoyancy-Force-based Kinetics Determination of Beta to Alpha Phase Transformation in Bulk Tin Plates

Xiaoliang Ji,Rong An,Fei Ma,Jiawei Hu,Chunqing Wang

DOI: https://doi.org/10.1016/j.matdes.2020.108550

IF: 9.417

2020-01-01

Materials & Design

Abstract:Reliable measurements of the kinetics of beta -> alpha allotropic transformation in Sn-based solder underlie the design and development of advanced interconnects for low-temperature electronics. In this paper, a highly-accessible and buoyancy-based method, but different from common dilatometry, was developed to consistently detect a change of the transformed fraction in bulk beta Sn plates (10 x 10 x 1 mm) with time at -20, -40, and -60 degrees C. Due to the concurrent effects of undercooling temperature and interfacial atomic diffusion, the beta -> alpha transformation in Sn plates at -40 degrees C proceeded most rapidly up to around 70%alpha Sn fraction after 168 h. The transformed fraction versus time curves yielded excellent fits to the classic Johnson-Mehl-Avrami-Kolmogorov model with a constant nucleation rate during transformation process (Avrami exponent, n of 4). Addition of nucleation agent accelerated the transformation by shortening the incubation period, but the nucleation rate decreased to zero in the following transformation (n = 3). Furthermore, coarsening grain size depressed beta -> alpha transformation and led to the saturation of nucleation sites in the vicinity of half transformation (n decreasing from 4 to 2). The simple, convenient, and reliable method proposed showed high sensitivity with detection limits of about 2%, and it could be a promising approach to study and predict solid-state phase transformation kinetics. (C) 2020 The Authors. Published by Elsevier Ltd.