Abstract:The property differences between equiaxed alpha particles and the beta matrix is a dominative factor for the micro -structural evolution of metastable-beta Ti alloys with bimodal microstructures during subtransus processing. For example, the deformation mismatching between two phases will result in extra work hardening and thus impacting the activation of softening mechanisms within beta phase. However, these special mechanisms are hitherto rarely clarified due to the lack of understanding into the interactions between alpha/beta phases in a wide subtransus processing range. In this work, the extra work hardening and activation of softening mechanisms induced by the alpha-beta interactions in a wide subtransus range of 745 degrees C-820 degrees C and 0.001 s- 1-1 s-1 of a bimodal metastable-beta Ti-55531 alloy were studied. Result indicated that variant softening mechanisms including the dynamic recovery, continuous dynamic recrystallization, and discontinuous dynamic recrystallization were activated within beta matrix under different processing domains. The fraction, size, and deformability of alpha particles dominated the extra work hardening and activation of softening mechanisms within beta phase by controlling the local storage of geometrically necessary dislocations, formation of subgrains, nucleation, and boundary migra-tion. Moreover, the adiabatic temperature rise under high strain rates indirectly influenced the work hardening activation of softening mechanisms. It is achieved not only by influencing the deformation mismatching, but also by inducing a newly found mechanism of selective alpha ->beta phase transformation. Furthermore, microstructural evolution mechanism maps of metastable-beta Ti alloys in a wide subtransus range were established for the in-struction on the microstructure controlling like the distribution and orientation of alpha phase, and the subgrain size and uniformity of beta phase, etc.

Role of Thermo-Mechanical Gyrations on the Α/β Interface Stability in a Ti6Al4V AM Alloy

Dynamic Phase Transformations in Additively Manufactured Ti-6Al-4V During Thermo-Mechanical Gyrations

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

In Situ Operando Investigations of the Thermal Instability Mechanisms of a Deformed Ti‐48Al Alloy

Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses

The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy

Microstructure Evolution and Alloying Elements Distribution Between the Phases in Powder Near-Β Titanium Alloys During Thermo-Mechanical Processing

Microstructural Modeling of the Α + Β Phase in Ti-6Al-4V: A Diffusion-Based Approach

Exploration of Nano-scale Structural Instabilities in Metastable Β Titanium Alloys Using Advanced Electron Microscopy

Interface Characteristics in an Α+β Titanium Alloy

Substructure and Texture Evolution of a Novel Near-Α Titanium Alloy with Bimodal Microstructure During Hot Compression in Α+Β Phase Region

On the Influence of Athermal Ω and Α Phase Instabilities on the Scale of Precipitation of the Α Phase in Metastable Β-Ti Alloys

Phase Transformation Behavior of Ti-1023 under Static Heat Treatment and Dynamic Thermo-Mechanical Coupling

The Indirect Influence of the Ω Phase on the Degree of Refinement of Distributions of the Α Phase in Metastable Β-Titanium Alloys

Metastable Beta Titanium Alloys: Tuning the Beta Phase Stability and Low-Temperature Martensitic Transformation of Metastable Beta Titanium Alloys

Microstructure and Crystallography of Α Phase Nucleated Dynamically During Thermo‐Mechanical Treatments in Metastable Β Titanium Alloy

Phase Composition Effects on Dynamic Behavior and Strain Rate Sensitivity in Metastable β-Ti Alloys

Extra Work Hardening and Activation of Softening Mechanisms Induced by Α-Β Interactions of a Metastable-Β Ti Alloy During Subtransus Processing

Mechanical Behavior of Metastable β Ti–10V–2Fe–3Al Alloy with and without Presence of α Phase

Exploration of Novel Nano-scale Instabilities in Metastable Beta Titanium Alloys Using Transmission Electron Microscopy and Aberration-Corrected Scanning Transmission Electron Microscopy

Using transmission Kikuchi diffraction to characterise α variants in an α + β titanium alloy