Abstract:One of the most critical aspects in understanding the deformation behavior of two-phase titanium alloys subjected to thermomechanical processes (TMPs) lies in being able to describe the flow stress accurately. To this end, in this study, initially, hot tension tests were conducted on a two-phase Ti-6Al-2Zr-1Mo-1V alloy. It was observed that the flow stress at a given temperature and strain rate exhibits work hardening, followed by flow softening. Flow softening occurs at the peak strain, where the maximum stress is observed; peak strain decreases with increasing temperature and decreasing strain rate. Variations in peak strain are more obvious at low temperatures and high strain rates. Later, the microstructure of the alloy was analyzed and the results show that work hardening and flow softening are caused by dynamic recrystallization (DRX). The DRX volume fraction was found to exhibit an increasing trend and discontinuous dynamic recrystallization (DDRX) was observed at increasing temperature and decreasing strain rate. With respect to microstructure evolution, a unified model consisting of a thermally activated stress component and an athermal stress component was developed. In the athermal stress term, dislocation density and the Hall-Petch effect were used to describe the work-hardening and flow-softening behavior. In the case of the dislocation term, the DRX effects were modeled considering the critical strain for DRX initiation and the DRX rate, which are both temperature-and strain rate-dependent. In the Hall-Petch effect term, the dependence of the Hall-Petch coefficient on the processing conditions was considered and the loss of Hall-Petch strengthening with deformation was modeled. Using the proposed model, the work-hardening and flow-softening behavior and microstructure evolution in Ti-6Al-2Zr-1Mo-1V alloys subjected to TMP were predicted. A good agreement could be observed between the experimental and predicted results. This study provides a solution for modeling work-hardening and flow-softening behavior and helps us understand the deformation behavior of two-phase titanium alloys subjected to TMP.

Dynamic Phase Transformations in Additively Manufactured Ti-6Al-4V During Thermo-Mechanical Gyrations

Role of Thermo-Mechanical Gyrations on the Α/β Interface Stability in a Ti6Al4V AM Alloy

Dynamic recrystallization of Ti-6Al-4V titanium alloy based on cellular automata

Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses

Dynamic Response of Conventional and Hot Isostatically Pressed Ti–6Al–4V Alloys: Experiments and Modeling

Unified Modeling of Work Hardening and Flow Softening in Two-Phase Titanium Alloys Considering Microstructure Evolution in Thermomechanical Processes

Microstructure Evolution of Ti-6Al-4V with Periodic Thermal Parameters During Axial Closed Die Rolling Process

Transformation and twinning induced plasticity in metastable Ti-Mo alloys under high strain rate deformation

Unravelling Thermal-Mechanical Effects on Microstructure Evolution under Superplastic Forming Conditions in a Near Alpha Titanium Alloy

Research progress of dynamic phase transformation behavior of titanium alloy under thermo-mechanical coupling process

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

Unravelling thermal history during additive manufacturing of martensitic stainless steel

Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment

Γ-Phase Transformation, Dynamic Recrystallization and Texture of a Forged TiAl-based Alloy Based on Plane Strain Compression at Elevated Temperature

Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression

Phase Transformation Behavior of Ti-1023 under Static Heat Treatment and Dynamic Thermo-Mechanical Coupling

Dynamic Recrystallization of Ti-5553 Alloy During Sub-Transus Thermomechanical Processing: Mechanisms and Its Role in Formation of a Bi-Modal Structure

The simulation of microstructural evolutions in friction stir additive manufacturing

Melting and solidification dynamics during laser melting of reaction-based metal matrix composites uncovered by in-situ synchrotron X-ray diffraction

Atypical Pathways for Lamellar and Twinning Transformations in Rapidly Solidified TiAl Alloy

Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations