Abstract:The kinetics for the isothermal carburization of pure iron (Fe) at a temperature of 1073 K (800°C) for times between 1.8 ks (0.5 h) and 32.4 ks (9 h) was experimentally observed by Togashi and Nishizawa. According to the observation, the austenite (γ) phase with the face-centered cubic (fcc) structure is produced on the Fe specimen of the ferrite (α) phase with the body-centered cubic (bcc) structure, and gradually grows into the α phase. The carbon (C) concentration in the γ phase at the moving γ/α interface is greater than that of the γ/(γ + α) phase boundary in a phase diagram of the binary Fe–C system. Although the former one gradually approaches to the latter one with increasing annealing time, their difference hardly vanishes even at the longest annealing time of 32.4 ks (9 h). The molar Gibbs energy of the γ phase was described by a two-sublattice model to evaluate the chemical driving force working at the moving γ/α interface. The evaluation provides that the chemical driving force monotonically decreases with increasing annealing time. This annealing time dependence of the chemical driving was used to calculate the migration distance of the γ/α interface as a function of the annealing time. The observation for the interface migration was satisfactorily reproduced by the calculation. According to the calculation, the migration of the γ/α interface is controlled by the interface reaction at the moving interface in the early stages, but it is governed mainly by the volume diffusion of C across the γ phase and partially by the interface reaction in the late stages. The experimental annealing times mostly belong to the transition stages between the rate-controlling processes of the interface reaction and the volume diffusion.

Determination of the Intrinsic Α/γ Interface Mobility During Massive Transformations in Interstitial Free Fe-X Alloys

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

A Jmak-Like Approach For Isochronal Austenite-Ferrite Transformation Kinetics In Fe-0.055 Wt-%N Alloy

Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

A Comparative Study on Intrinsic Mobility of Incoherent and Semicoherent Interfaces During the Austenite to Ferrite Transformation

A New Kinetic Mode During the Austenite-to-Ferrite Transformation in Fe–Mn and Fe–Mn–Mo Alloys

A New Kinetic Mode During the Austenite - to-Ferrite Transformation in Fe–Mn and Fe–Mn–Mo Alloys

Delta/Gamma Transformation In Non-Equilibrium Solidified Peritectic Fe-Ni Alloy

Application of the Thermodynamic Extremal Principle to Massive Transformations in Fe-C Alloys

A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe–C–M alloys

Interface Motion and Interface Mobility of the Partitioning Phase Transformations in Fe-Mn-C and Fe-C Alloys: A Cyclic Phase Transformation Approach

Δ/γ Transformation in Non-Equilibrium Solidified Peritectic Fe-Ni Alloy

A Simple Calculation Method of Driving Force of Gamma ->Alpha Transformation in Fe-C-X-I Systems with Orthoequilibrium and Paraequilibrium Models

Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

Determination of γ/γ' interface free energy for solid state precipitation in Ni-Al alloys from molecular dynamics simulation

Grain boundary migration in polycrystalline $α$-Fe

Analysis of Transformation Stasis During the Isothermal Bainitic Ferrite Formation in Fe–C–Mn and Fe–C–Mn–Si Alloys

Kinetic Analysis for Contribution of Interface Reaction to Migration of γ/α Interface in Binary Fe–C System

Lengthening Kinetics of Pro-Eutectoid Ferrite Ledge in Fe-C Alloy under Interface-Diffusion Mixed Control Mode

Consideration of the growth mode in isochronal austenite-ferrite transformation of ultra-low-carbon Fe–C alloy

Characteristics of the γ→α transformation in Fe–Mn alloys