Abstract:Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate, postponed onset of necking and excellent formability. In-situ transmission electron microscopy has been performed to systematically investigate the dynamic interactions between dislocations and alpha martensite at microscale. Local stress concentrations, e.g. from notches or dislocation pile-ups, render free edges and grain boundaries favorable nucleation sites for alpha martensite. Its growth leads to partial dislocation emission on two independent slip planes from the hetero-interface when the austenite matrix is initially free of dislocations. The kinematic analysis reveals that activating slip systems on two independent {111} planes of austenite are necessary in accommodating the interfacial mismatch strain. Full dislocation emission is generally observed inside of austenite regions that contain high density of dislocations. In both situations, phase boundary propagation generates large amounts of dislocations entering into the matrix, which renders the total deformation compatible and provide substantial strain hardening of the host phase. These moving dislocation sources enable plastic relaxation and prevent local damage accumulation by intense slipping on the softer side of the interfacial region. Thus, finely dispersed martensite distribution renders plastic deformation more uniform throughout the austenitic matrix, which explains the exceptional combination of strength and ductility of TRIP steels.

A Preliminary In-situ TEM Study of Martensite/Austenite Interface Migration in an Fe-20Ni-5.4Mn Alloy

An in Situ Transmission Electron Microscopy Study of Interface Growth During Martensitic Transformation in an Fe–Ni–Mn Alloy

In Situ Observation of Austenite–ferrite Interface Migration in a Lean Mn Steel During Cyclic Partial Phase Transformations

In Situ Austenite–martensite Interface Mobility Study During Annealing

Dislocation Activities at the Martensite Phase Transformation Interface in Metastable Austenitic Stainless Steel: An In-situ TEM Study

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

Role of interface morphology on the martensitic transformation in pure Fe

Interface structure and stability of deformation-induced martensite in a Ni-Ti-Nb alloy with wide hysteresis

Phase-field simulation of austenite reversion in a Fe-9.6Ni-7.1Mn (at.%) martensitic steel governed by a coupled diffusional/displacive mechanism

Phase-field simulation of austenite reversion in a Fe-9.6Ni-7.1Mn (at%) martensitic steel governed by a coupled diffusional/displacive mechanism

IN SITU OBSERVATION OF GROWTH OF BAINITE IN Fe-Ni ALLOY

In-situ TEM study of dislocation emission associated with austenite growth

Mobility of Various Intervariant Interfaces in 18R Martensite in a Cu-Zn-Al Alloy Part I: In-situ Observations

Reverse transformation characteristics of thermally induced epsilon(hcp) martensite in an Fe-Mn-Si based alloy

Electron Microscopy Analysis of Deformation Induced Ε Martensite Transformation in an Fe-Mn-Si-Cr-Ni Alloy

Mechanical Behavior and Martensitic Transformation of an Fe–Mn–Si–Al–Nb Alloy

Reverse transformation characteristics of thermally induced ε(hcp) martensite in an Fe-Mn-Si based alloy

Direct observation of temperature-/magnetic-field-induced transition between martensite and premartensite and their relaxation in Ni-Mn-In-Al alloy

Microstructural Evolution of High Cr Ferrite/martensite Steel after Deformation in Metastable Austenite Zone

Dissecting the Mechanism of Martensitic Transformation Via Atomic-Scale Observations

High-resolution Electron Microscopy Study on the Substructure of Ti–Ni–Hf B19′ Martensite