Abstract:Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate, postponed onset of necking and excellent formability. In-situ transmission electron microscopy has been performed to systematically investigate the dynamic interactions between dislocations and alpha martensite at microscale. Local stress concentrations, e.g. from notches or dislocation pile-ups, render free edges and grain boundaries favorable nucleation sites for alpha martensite. Its growth leads to partial dislocation emission on two independent slip planes from the hetero-interface when the austenite matrix is initially free of dislocations. The kinematic analysis reveals that activating slip systems on two independent {111} planes of austenite are necessary in accommodating the interfacial mismatch strain. Full dislocation emission is generally observed inside of austenite regions that contain high density of dislocations. In both situations, phase boundary propagation generates large amounts of dislocations entering into the matrix, which renders the total deformation compatible and provide substantial strain hardening of the host phase. These moving dislocation sources enable plastic relaxation and prevent local damage accumulation by intense slipping on the softer side of the interfacial region. Thus, finely dispersed martensite distribution renders plastic deformation more uniform throughout the austenitic matrix, which explains the exceptional combination of strength and ductility of TRIP steels.

Mobility of Various Intervariant Interfaces in 18R Martensite in a Cu-Zn-Al Alloy Part I: In-situ Observations

Mobility of Various Intervariant Interfaces in 18r Martensite in A Cu-Zn-Al Alloy - Part Ii: Some Theoretical Considerations

Structure And Mobility Of Martensite Variant Interfaces In A Cu-Zn-Al Shape Memory Alloy

The structure and mobility of the intervariant boundaries in 18R martensite in a Cu–Zn–Al alloy

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Interface Structure and Mobility in Martensitic Shape Memory Alloys

Structure of A-C Type Intervariant Interface in Nonmodulated Martensite in a Ni-Mn-Ga Alloy

A Preliminary In-situ TEM Study of Martensite/Austenite Interface Migration in an Fe-20Ni-5.4Mn Alloy

Substructure and Boundary Structure of Deformed 18R Martensite in a Cu–Zn–Al Alloy

The relationships between the martensite variants in Cu-based shape memory alloys analysed with phenomenological theory and group theory

In Situ Observation of Thermoelastic Martensitic Transformation of Cu-Al-Mn Cryogenic Shape Memory Alloy with Compressive Stress

Dislocation description of martensite interfaces based on misfit analysis

In Situ Observation of Austenite–ferrite Interface Migration in a Lean Mn Steel During Cyclic Partial Phase Transformations

An in Situ Transmission Electron Microscopy Study of Interface Growth During Martensitic Transformation in an Fe–Ni–Mn Alloy

Analysis of microstructure evolution during tensile stress induced martensitic transformations

Dislocation Activities at the Martensite Phase Transformation Interface in Metastable Austenitic Stainless Steel: An In-situ TEM Study

Study of Stabilization of CuAlBe Alloy During Martensitic Transformation by Internal Friction

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Studies on Dynamics of Interfaces in Cu-Ai-Zn-Ni Alloy

An Overview of the Cyclic Partial Austenite-Ferrite Transformation Concept and Its Potential

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys