Abstract:The martensitic transformation between the high-temperature face-centered cubic (FCC) phase and the low-temperature body-centered cubic (BCC) phase in iron-based alloys has been studied for years, which plays a critical role in controlling microstructures and hence properties of the alloys. Generally, the BCC structure martensitic phase forms from the FCC parent phase, involving a collective motions of atoms over a distance less than the interatomic distance in the vicinity of the interphase boundary. Thus the structure of interphase boundary separating the FCC and BCC phases is the key characteristics to quantitatively understanding the mechanism and kinetics of martensitic transformation. Due to the difficulty in observing the atomic motions taking place at a velocity as high as the speed of sound, the experimental investigation on the migration of FCC/BCC interphase boundary during the transformation is as yet limited. Noteworthily, molecular dynamics (MD) simulation has been applied to studying the martensitic transformation, in particular for investigating the mobility of the FCC/BCC interphase boundary in iron. However, in most of the MD studies the atomistically planar interfaces of {111} FCC // {110} BCC are considered as the initial configuration of the interphase boundary between FCC and BCC phases, which is in contradiction to the high-resolution TEM observations. In fact, the FCC/BCC interphase boundary, which is known as the macroscopic habit plane, is a semi-coherent interface consisting of several steps and terrace planes on an atomic scale. In the present work, the atomic configuration of a terrace-step FCC/BCC interphase boundary of iron is built in terms of the topological model. The MD simulation is conducted to clarify the mechanism of interphase boundary migration in the FCC-to-BCC transformation. The results show that the FCC/BCC boundary migrates along its normal at the expense of FCC phase as a result of the lateral motions of the transformation dislocations. Meanwhile, the interphase boundary maintains the stable terrace-step structure during the transformation. Further examinations reveal that the transformation dislocations move steadily at a velocity as high as (2.8 ± 0.2) × 10 3 m/s, affecting the migration of the interphase boundary with a constant velocity of about (4.4 ± 0.3) × 10 2 m/s. The effective migration velocity of FCC/BCC interface exhibits dynamic properties consistent with the characteristic features commonly observed in a displacive martensitic transformation. Additionally, the motion of transformation dislocations gives rise to the macroscopic shape strain composed of a shear component \begin{document}$ {\varGamma _{{\rm{yz}}}} = 0.349$\end{document} parallel to the boundary and a dilatation \begin{document}$ {\varGamma _{{\rm{zz}}}} = 0.053$\end{document} normal to the boundary in the MD simulation, which is close to the crystallographic calculations by the topological model.

The structure and mobility of the intervariant boundaries in 18R martensite in a Cu–Zn–Al alloy

Structure And Mobility Of Martensite Variant Interfaces In A Cu-Zn-Al Shape Memory Alloy

Substructure and Boundary Structure of Deformed 18R Martensite in a Cu–Zn–Al Alloy

Mobility of Various Intervariant Interfaces in 18r Martensite in A Cu-Zn-Al Alloy - Part Ii: Some Theoretical Considerations

Mobility of Various Intervariant Interfaces in 18R Martensite in a Cu-Zn-Al Alloy Part I: In-situ Observations

Characteristics of the A/D Type Twin Boundary in 18R Martensite in a Cu–Zn–Al Alloy

The relationships between the martensite variants in Cu-based shape memory alloys analysed with phenomenological theory and group theory

On the A/D type twin boundary in 18R martensite of a Cu-Zn-Al alloy

Structure of A-C Type Intervariant Interface in Nonmodulated Martensite in a Ni-Mn-Ga Alloy

Molecular dynamics simulation of migration behavior of FCC-BCC atomic terrace-step phase boundary in iron-based alloy

Determination of the orientation relationship between austenite and incommensurate 7M modulated martensite in Ni–Mn–Ga alloys

High-resolution Electron Microscopy Study on the Substructure of Ti–Ni–Hf B19′ Martensite

Atomic-scale study of the mechanical properties of dual-phase fcc/bcc crystallites: influences of alloying elements and phase boundaries

Phase-Field Modelling of the Martensitic Transformation in Shape Memory Alloy Au30cu25zn45

Identification of B33 and Cm martensitic products in CuZr-based alloys: A DFT study

Anharmonic Incommensurate Structure Modulation in Ni-Mn-Ga Martensite Exhibiting Highly Mobile Twin Boundaries

HREM Study on the Intervariant Structure of Ti-Ni-Hf B19′ Martensite

High resolution electron backscatter diffraction study on the heterogeneities of tetragonal distortion in Fe-C martensite at the microstructural scale

Surface Relief Associated with Martensite and Bainite in a Cu–Zn–Al Alloy Measured by Atomic Force Microscopy

Structure characterization of special boundaries in Fe47Mn30Co10Cr10B3 dual-phase high-entropy alloy

Study of Dislocation Boundary Structure in Al–Li Alloy During Bending