Abstract:The excellent matching of strength and toughness with respect to lath martensite is closely related to its hierarchical configuration and crystallographic features. Recently, a few literatures reported that the GreningerTroiano (G-T) relationship, instead of the generally accepted Kurdjumov-Sachs (K-S) relation, was determined in some lath martensite steels. However, the underlying reason is still waiting to be explored. In the present study, systematic characterizations were performed in water-quenched Fe-12Ni-1.5Si-0.2C steel firstly, then a modified version of crystallographic model developed by Morris et al. was proposed to clarify the microstructure and the crystallography with G-T relationship. As the main crystallographic features, the orientation relationship between prior austenite and martensitic variants is close to G-T rather than K-S relation. Further characterization shows that the block interface is parallel to the annealing twin boundary of prior austenite, indicating the {111}gamma habit plane of blocks. Naturally, three crystallographically distinct blocks with {111}gamma interfaces can be configured into a packet with self-accommodation manner to minimize macro strain. In fact, such a hierarchical configuration with G-T relationship can be understood clearly by the modified version of crystallographic model. Firstly, regarding the bivariant block as the basic element which undertakes the invariant plane shear, the total shear strain within each packet region can thus be effectively cancelled out on the common habit planes of {111}gamma due to the self-accommodation effect, leading to an essentially shear strain-free pattern; Secondly, a higher hierarchy is accompanied with a significant decrease of strain and only a homogenous dilation of 0.02 remains in a prior austenite grain, which is closely related to the unique hierarchy; Thirdly, the G-T relationship is natural preferred for the present steel, which satisfies two conditions in this crystallographic model: (i) a minimum of angular deviation between the {111}gamma and the habit plane of bivariant blocks; (ii) three slip systems of dislocations with 111 alpha' Burgers vectors involved during the martensitic transformation, which is also universally observed in the TEM examinations. Besides that, compared with the case of K-S relationship, a potential influence of G-T relationship on mechanical properties may embody in inducing a lower ductile-brittle transition temperature and better toughness of lath martensite steels.

High resolution electron backscatter diffraction study on the heterogeneities of tetragonal distortion in Fe-C martensite at the microstructural scale

Tetragonality mapping of martensite in a high-carbon steel by EBSD

The Crystal Structure of As-quenched Fe–C Martensite

Mapping of lattice distortion in martensitic steel-Comparison of different evaluation methods of EBSD patterns

Double Diffraction or ω-Fe Diffraction in Body-Centered Cubic {112}<111>-Type Twinned Martensite

AFM Observation and Quantitative Analysis of Macroscopic Lattice Deformation Character in ｛225｝f Martensite Transformation

Machine learning informed tetragonal ratio c/a of martensite

Double Diffraction or -Fe Diffraction in Body-Centered Cubic {112}?111?-Type Twinned Martensite

Relation Between Martensitic Transformation Temperature Range and Lattice Distortion Ratio of Nimngacocu Heusler Alloys

Effect of distribution of carbon and alloying element on martensite transformation in metastable austenitic manganese steel

Derived Crystal Structure of Martensitic Materials by Solid-Solid Phase Transformation

The microstructure and crystallography of lath martensite with Greninger-Troiano orientation relationship in a Fe-12.8Ni-1.5Si-0.22% C steel

Crystallographic Analysis of Lath Martensite in a 13Cr-5Ni Steel by Electron Backscattering Diffraction

Characteristics of thermal- and strain-induced ε-martensite in Fe50Mn30Co10Cr10 multi-component alloy: Effect of grain size

Grain-resolved temperature-dependent anisotropy in hexagonal Ti-7Al revealed by synchrotron X-ray diffraction

Revisiting the Crystallography of {225}γ Martensite: How EBSD Can Help to Solve Long-Standing Controversy

The structure and mobility of the intervariant boundaries in 18R martensite in a Cu–Zn–Al alloy

Crystal structure of a long-period ordered phase in Fe-C martensite and computer simulation of its electron diffraction patterns

Uncovering heterogeneity of local lattice distortion in TiZrHfNbTa refractory high entropy alloy by SR-XRD and EXAFS

Strain anisotropy models for refined diffraction line profile analysis in cubic metals

AFM Observation of Macroscopic Lattice Deformation Character Istic of {3,10,15}_f Martensite Transformation