Abstract:The cast Al-3Li-2Cu-0.15Zr alloy is a promising material due to its high strength-to-weight ratio and stiffness. In this work, the Sn addition and heat treatment were employed to regulate its microstructure and mechanical properties. The results indicate that Sn exists in the matrix as Sn solute atoms and Sn-rich particles including Li5Sn2, Li13Sn5, Li7Sn2, and Li22Sn5. The number of these particles increases as the Sn content rises. The addition of Sn significantly enhances the grain refinement, reducing the average grain size to 50.2 mu m when 0.3 wt% Sn is incorporated. During the aging process, the 8 ' and 8'/beta ' precipitates gradually grow and coarsen, while the T1 and 0 ' precipitates nucleate and grow. Some 8 ' precipitates attach to the board of 0 ' to form sandwich-like phases, such as 8'/0'/8'. The addition of Sn promotes the nucleation of 0 ' and T1 precipitates. This is achieved by leveraging the Sn-rich particles as nucleation sites and utilizing Sn solute atoms to decrease the interface energy between these precipitates and alpha-Al. Moreover, the addition of Sn with a high vacancy binding energy and the reduction of aging temperature can effectively decrease the diffusion rate of Li atoms and vacancies, thereby inhibiting the broadening of the 8 '-PFZ. After a suitable heat treatment, the Sn-modified Al-Li alloy exhibits a microstructure characterized by fine and equiaxed grain, fine and uniform 8 ' precipitates, and a narrow 8 '-PFZ, contributing to excellent mechanical properties of the alloy. Significantly, the underlying mechanisms behind the aforementioned observations were discussed analytically.

Single-directional dynamic equilibrium between precipitation and dissolution in solid-aluminum/melted-tin system

Molecular Dynamic Simulations for Dissolution of Zn-Al Binary System

Dissolution and Nucleation Behavior of Al in Ta/Sn/Al Joints During Ultrasonic-Assisted Soldering

The role of Sn element on the deformation mechanism and precipitation behavior of the Al–Cu–Mg alloy

Microstructure Design and Dissolution Behavior Between 2024 Al/Sn with the Ultrasonic-Associated Soldering

Strengthening mechanism of Al/Sn interfaces: Study from experiments and first-principles calculation

Effect of Small Additions of Alloying Elements on the Properties of Sn-Zn Eutectic Alloy

Deformation Mechanism and Dynamic Precipitation in a Mg-7Al-2Sn Alloy Processed by Surface Mechanical Attrition Treatment

The wetting behavior of Al/Sn under ultrasonic action

Interfacial Microstructure Evolution and Mechanical Properties of Al/Sn Joints by Ultrasonic-Assisted Soldering

Ultrasonic Dissolution of Solid Al in Liquid Sn During Soldering: Modeling and Equation, Trend Prediction, Accelerating Effect

Influence of Solutal Convection on Solute Distribution of Melt During Preparation of Directionally Solidified Sn–36 At.%ni Peritectic Alloy

The Effects of the Secondary-Phase Distribution on the Dissolution Rate and Mechanical Properties of Soluble Al-Mg-Ga-In-Sn Alloys

The Effect of In Concentration and Temperature on Dissolution and Precipitation in Sn–Bi Alloys

On Melt Concentration at the Solid/liquid Interface During Preparation of Directionally Solidified Sn–36 At.%ni Peritectic Alloy

Regulating the Microstructure and Mechanical Properties in Cast Al–3Li–2Cu-0.15Zr Alloy Via Sn Addition and Heat Treatment

In-situ TEM study on the precipitation behavior of an Al-Mn-Mg-Sc-Zr alloy formed by SLM

Stabilizing Supersaturation with Extreme Grain Refinement in Spinodal Aluminum Alloys

Influence of Mg, Ag and Zn minor solute additions on the precipitation kinetics and strengthening of an Al-Cu-Li alloy

Effects of precipitates and solute atoms on the work hardening and softening behavior of Zn-rich aluminum alloy

High solid-solution strengthening mechanism of a novel aluminum-lithium alloy fabricated by electromagnetic near-net shape technology