Abstract:Sodium alginate—a natural innoxious polymer, which can be dissolved in cold water by mechanical stirring and in which irreversible gelation takes place when enough calcium ions are added—is applied for in situ forming process of ceramics by using chelator to control its gelling behavior. In the present work, the viscosity of sodium alginate solution and factors influencing on it were analyzed. How to control the gelation behavior was discussed. The rheology property of the slurry was examined. An appropriate method to apply the gelation of sodium alginate in order to fabricate alumina ceramic green body was systematically investigated. The viscosity of alumina slurry with 50 vol.% Al2O3 and 1.8 vol.% Ca3(PO4)2 dispersed by 1 wt.% sodium alginate solution is less than 400 MPa s when the shear rate is higher than 50 s−1. The green body has uniform structure and smooth surface, and bending strength is about 8 MPa. After being sintered at 1550 °C for 2 h the linear shrinkage of ceramics composed of 95% alumina is about 15.7% during firing and the relative density of the final product is about 98.7%. Bending strength reaches 320 MPa. SEM images show compact and uniform microstructure.

Gelcasting of Alumina Via Cross-Linking of a Polyelectrolyte Dispersant

Room-temperature Gelcasting of Alumina with Tartaric Acid and Glutaraldehyde

Dispersion and Gelation Behavior of Alumina Suspensions with Isobam

Dispersion and Gelation Properties of Alumina Systems with Isobam Assisted by Dicarboxylic Acids

Alumina gelcasting by using HEMA system

Gelcasting of Alumina Ceramic in Presence of Water-Soluble Polymer

Gelcasting of Alumina with a Mixed PVP–MAM System

Alumina casting based on gelation of gelatine

Gelcasting of alumina suspension using gellan gum as gelling agent

Natural additives in protein coagulation casting process for improved microstructural controllability of cellular ceramics

Study On Gel-Tape Casting In The Mixed Polyvinyl Alcohol And Acrylamide Systems

Gelcasting of alumina ceramics in the mixed acrylamide and polyacrylamide systems

A Novel Gelcasting of Alumina Suspension Using Curdlan Gelation

Gelcasting of Alumina Ceramic Components in Nontoxic Na-alginate–CaIO3–PVP Systems

A Synergistic Low‐Toxicity Gelcasting System by Using HEMA and PVP

Gelcasting of Alumina Ceramic in Mixed PVP–HEMA Systems

Gelcasting of ceramic suspension in acrylamide/polyethylene glycol systems

New gel-casting process for alumina ceramics based on gelation of alginate

Fabrication of Alumina Green Body Through Gelcasting Process Using Alginate

GELCASTING OF ALUMINA SLURRY DISPERSED IN SILICA SOL WITHOUT DE-AIRING PROCESS

Elimination of Surface Spallation of Alumina Green Bodies Prepared by Acrylamide‐Based Gelcasting Via Poly(vinylpyrrolidone)