Abstract:By surface modification with APTMS, spontaneous coagulation casting (SCC) of fused silica based on Isobam was achieved and the possible coagulation and molding mechanism is proposed. Through the interaction between the polar groups on the Isobam molecular chain and the incorporated –NH2 groups on the surface of the silica particles, Isobam molecular chains were adsorbed on the surface of particles, which initiate the formation of flocs and the solidification of the suspension. The addition of dispersant TMAH results in the hydrolyzation of Isobam, forming more –COO–, which effectively improves the fluidity and stability of the suspension. Then the zeta potential, rheological properties and coagulation behavior of the suspension were systematically investigated and the fused silica suspension with high solid content (up to 52 vol%), low viscosity and good coagulation properties were prepared at 1.8 wt% TMAH and 0.5 wt% Isobam dosage. After sintering at 1260 °C for 4 hours, the fused silica ceramics (50 vol% solid content) shows a high bending strength of 61.59 MPa, the lowest dielectric loss tanδ of 8.46×10-4 and the dielectric constant of 3.72. Thus, this work provides a simple and effective method for preparing fused silica and other ceramics with negative surface charge by Isobam SCC.

Dispersion and Gelation Behavior of Alumina Suspensions with Isobam

Dispersion and Gelation Properties of Alumina Systems with Isobam Assisted by Dicarboxylic Acids

Gelcasting of Alumina Via Cross-Linking of a Polyelectrolyte Dispersant

Influence of bivalent ions on the dispersion and gelation of ceramics suspensions

Gelcasting of alumina suspension using gellan gum as gelling agent

Temperature Induced Gelation of Non–aqueous Alumina Suspension Using Oleic Acid As Dispersant

Dispersion of aqueous alumina suspensions using copolymers with synergistic functional groups

Investigation of gelation mechanism and the effects of APS on AlN slurries with Isobam

Preparation and properties of fused silica ceramics by Isobam spontaneous coagulation casting

Rheological Behavior of Alumina Aqueous Suspension for Extrusion Gelation Freeform Fabrication

A Novel Gelcasting of Alumina Suspension Using Curdlan Gelation

Gelcasting of alumina ceramics in the mixed acrylamide and polyacrylamide systems

Deflocculation of Alumina Suspensions Using Polyelectrolyte Dispersants

Dispersion behavior and stabilization mechanism of alumina powders in silica sol

Gelcasting of Alumina Ceramic in Presence of Water-Soluble Polymer

Rheological Characterization of Alumina Ceramic Suspensions in Presence of A Dispersant and A Binder

Gelcasting of Alumina Ceramic Components in Nontoxic Na-alginate–CaIO3–PVP Systems

Study on Dispersion Behavior and Its Influence Factors for Alumina Suspension

Gelcasting of Alumina with a Mixed PVP–MAM System

Mechanical and Electrical Properties of Lithium Stabilized Sodium Beta Alumina Solid Electrolyte Shaping by Non-Aqueous Gelcasting

Room-temperature Gelcasting of Alumina with Tartaric Acid and Glutaraldehyde