Abstract:In manufacturing of the Ultra Large Scale Integrated circuits, the slurry, as an essential factor affecting the chemical and mechanical function during CMP process, has an important impact on the efficiency and quality of CMP for SiO2 Inter Level Dielectric Film. The dispersion and stability, two of the important character parameters of slurry, have a great effect upon surface, scratch, stability of polishing quality and application in practice. In this article the dispersants with different amounts of amidocyanogen are added to self-made slurry respectively. It is observed that the stability of slurry with single amidocyanogen dispersant is better when the weight content of that is around 0.1% through measuring Zeta potential. On the other hand, the Zeta potential of the slurry with hydroxy dispersant goes up gradually along with the amount of that in dispersant. The Steric hindrance effect is enhanced with increasing of the molecular weight of the dispersant. All these factors can improve stability of the slurry. So the stability of the slurry containing polymer dispersant D with a large amount of hydroxy is the best among them when the weight content of dispersant is around 0.3%. In view of the dispersing mechanism and effects for above-mentioned two kinds of dispersants, the polymer dispersant D with many hydroxy is able not only to raise the Zeta potential of the surface of colloid, increasing the electric static repulsive force among particles, but also to effectively enhance the steric repulsion as a result of large molecular chain itself. In result, the slurry is made more stable.

Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology, solid loading, and self-leveling behavior

Relationship between the adhesion properties of UV-curable alumina suspensions and the functionalities and structures of UV-curable acrylate monomers for DLP-based ceramic stereolithography

Study of alumina ceramic parts fabricated via DLP stereolithography using powders with different sizes and morphologies

Dissipative Particle Dynamics of Nano-Alumina Agglomeration in UV-Curable Inks

Dispersion of aqueous alumina suspensions using copolymers with synergistic functional groups

Improvement in dispersion stability of alumina suspensions and corresponding chemical mechanical polishing performance

Influence of resin composition on rheology and polymerization kinetics of alumina ceramic suspensions for digital light processing (DLP) additive manufacturing

Deflocculation of Alumina Suspensions Using Polyelectrolyte Dispersants

High Solid Loading, Low Viscosity Photosensitive Al2O3 Slurry for Stereolithography Based Additive Manufacturing

Influence of Dispersants on Dispersion Stability of Super-fine Alumina Particles Suspension

Experimental study on influences of dispersant on dispersion and stability of CMP slurry with silica

Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing

Rheological Characterization of Alumina Ceramic Suspensions in Presence of A Dispersant and A Binder

Effects of Dispersant Concentration on the Properties of Hydroxyapatite Slurry and Scaffold Fabricated by Digital Light Processing

Adsorption Of Acrylic Copolymers At The Alumina-Water Interface

Study On The Rheological Behavior Of Sub-Micron Alumina Aqueous Suspensions

Preparation of concentrated aqueous alumina suspensions for soft-molding microfabrication

Interaction and Dispersion Stability of Alumina Suspension with PAA in N,N′-dimethylformamide

Study on Dispersion Behavior and Its Influence Factors for Alumina Suspension

Photosensitive ZrO2 suspensions for stereolithography

Addition of AlO(OH) Nanoparticles to Assist Stabilizing Emulsion for Digital Light Processing Lightweight but Robust Porous Alumina Ceramics