Abstract:The "all in one" multifunctional and concentrated daily chemical products are required by the market, such as the long‐term release of anti‐bacterial, medical, or perfume agents. These functions mainly rely on the microcapsules, which could encapsulate these functional and unstable molecules, and then release them in the long term. To stabilize these functional solid particles in a high‐content surfactant, it is necessary to add a suspending rheological modifier. The poly(acrylic acid) (PAA)‐based rheology modifier is one of the most common additives in the industry of daily chemicals, for thickening or suspending. In this paper, linear PAA, and branched PAA polymers (Carbomer 941 and Carbomer 940) were selected to study the suspending ability of PAA‐based rheology modifier in high‐content surfactant and to investigate the effect of PAA polymer structure and Mw on the complex solution's rheological properties. The yield and viscosity test of the complex solutions of linear PAA and high‐content surfactant revealed that the addition of linear PAA could lead to lower yield stress and viscosity, and failed to suspend the polystyrene (PS) model microspheres due to its smaller mean square radius of gyration. The branched PAA polymer, Carbomer 940 and Carbomer 941 were more stable than the linear PAA in these two kinds of surfactant. More specifically, Carbomer 940 with a higher Mw, would exhibit higher yield stress and viscosity than Carbomer 941 with a lower Mw in nonionic surfactant alcohol polyoxyethylene ether (AEO) solvent with content less than 5 wt%. When the content was higher than 5 wt%, Carbomer 941 presented higher yield stress and viscosity than Carbomer 940, and successfully suspended PS microspheres in the 20 wt% AEO solution. This could depend on the polymer chain's elongation state of these two PAA‐based branched rheology modifiers. The same trend happened in the appearance of Carbomer 940 and Carbomer 941 in alcohol ether sulphate (AES) solution. However, the electrostatic repulsive force between the AES and PAA‐based rheology modifier could further make the polymer chain curl up and restrain the suspending ability in a lower content surfactant solution. Therefore, this fundamental research could guide the application of the anionic polyelectrolytes in the concentrated daily chemical product for stable suspending particles.

Poegma-B-Paa Comb-Like Polymer Dispersant For Al-2 Suspensions

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Synthesis and Characterization of PE-b-POEGMA Copolymers Prepared by Linear/Hyperbranched Telechelic Polyethylene-Initiated ATRP of Oligo(ethylene glycol) Methacrylates

Micron-Size Functional Uniform Pmma Particles by Dispersion Copolymerization in Polar Media

Stability Study of Inverse Suspension Copolymerization of 1,1,3,3‐tetramethylguandium Acrylate and N,N′‐methylenebisacrylamide

Effect of comb polymer dispersants with different molecular structures on the performance of LiFePO4 suspensions

Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

Improvement in dispersion stability of alumina suspensions and corresponding chemical mechanical polishing performance

Effects of Comb Copolymer Paa-G-Mpeo on Rheological and Dispersion Properties of Aqueous Caco3 Suspensions

Study of structure–performance relationships of polymeric dispersants on particle dispersion and stabilisation

One-pot Synthesis of Block Copolymer Dispersant by ICAR ATRP with Ppm Copper Catalyst and the Dispersibility on Pigment

Effect of Paa-G-Mpeo Comb Polymer on Tio2 Suspensions

Rheological Characterization of Alumina Ceramic Suspensions in Presence of A Dispersant and A Binder

Rheology of Fumed Silica/polypropylene Glycol Dispersions

Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology, solid loading, and self-leveling behavior

The suspending appearance of poly(acrylic acid)‐based rheology modifier in high‐content surfactant: The effect of polymer structure and molecular weight on the rheological properties of the complex systems

Analysis of the action mechanism of polymer dispersant on dense ethanol alumina suspension using colloidal probe AFM

Novel comb‐like anion‐nonionic copolymer for improving the stability of pymetrozine suspension concentrate

Influence of dispersant contents on rheological behavior of nano-sized tetragonal polycrystals zirconia's suspensions

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

SYNTHESIS AND CHARACTERIZATION OF PAA-g-NPEO COPOLYMERS AND EVALUATION AS DISPERSANTS IN DISPERSION POLYMERIZATION OF ACRYLAMIDE