Abstract:An all-fiberized linearly polarized nanosecond fiber laser with high peak power and near-transfrom-limited linewidth is demonstrated based on master oscillator power amplifier structure. Employing the polarization-maintaining large-mode-area Yb-doped fiber with tapered longitudinal geometry, short length and high concentration, the main amplifier possesses excellent performance for nonlinear effect suppression, including stimulated Brillouin scattering effect and self-phase modulation effect. As a result, an average output power of 8.8 W with the pulse duration of 3.8 ns is obtained at the repetition frequency of 80 kHz after the amplification, corresponding to the peak power of similar to 30 kW and the pulse energy of 110 uJ. The near-transform-limited linewidth is maintained, accompanying high polarization extinction ratio of more than 16 dB and near-diffraction-limited beam quality with M-2 factor of 1.2. It is known to be the record output power of all-fiber linearly polarized ns fiber laser with transform-limited linewidth, to the best of our knowledge.

Monolithic Linearly Polarized Nanosecond Fiber Laser With Record Peak Power And Near-Transform-Limited Linewidth

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

Power scaling of high-power linearly polarized fiber lasers with <10 GHz linewidth

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

High Energy (100 Mj) and High Peak Power (8 MW) Nanosecond Pulses Delivered by Fiber Lasers and Self-Focusing Analysis Based on a Novel Mode Decomposition Method

Tapered active fiber simultaneously enabled 141 W high average and 1.3 MW high peak power via all-fiber and polarization-maintained picosecond amplifier

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

All-polarization-maintaining linear fiber laser mode-locked by nonlinear polarization evolution with phase bias

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

PCF Based High Power Narrow Line Width Pulsed Fiber Laser

Incoherently pumped high-power linearly-polarized single-mode random fiber laser: experimental investigations and theoretical prospects

115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers