Abstract:We present a new method of SBS suppression in fiber amplifier system by employing simultaneously phase and intensity modulation. In this way, a GHz narrow-linewidth polarization-maintaining (PM) all-fiber pulsed laser is obtained based on a master oscillator power amplifier (MOPA) configuration. The pulsed seed is generated from a single-frequency continuous wave (CW) laser at 1064 nm by simultaneous modulation using an electro-optic intensity modulator (EOIM) and an electro-optic phase modulator (EOPM). Theoretical model is built and simulation framework has been established to estimate the SBS threshold of the pulsed amplifier system before and after modulation. In experiment, in order to suppress SBS effectively, the pulse width is set to be 4 ns and the phase modulation voltage is set to be 5 V. After amplifying by the amplifier chain, a ~3.5 ns pulsed laser with average/peak power of 293 W/3.9 kW is obtained at intensity repetition rate of 20 MHz and phase repetition rate of 100MHz, showing good agreement with simulation results. The linewidth of the output laser is ~4.5 GHz, the M(2) factor at maximal output power is measured to be ~1.1 and the slope efficiency is ~86%.This method provides some references to suppress the SBS in narrow linewidth pulsed amplifier systems.

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Single-frequency pulsed laser source with hybrid MOPA configuration

1 Mj, 500 Khz Nd:YAG/Nd:YVO4 MOPA Laser with a Nd:YAG Cavity-Dumping Seed Laser

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

1.2 kW, 20 kHz Nanosecond Nd:YAG Slab Laser System

High-power Multichannel PPMgLN-based Optical Parametric Oscillator Pumped by a Master Oscillation Power Amplification-Structured Q-switched Fiber Laser

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

2.19 kW narrow linewidth FBG-based MOPA configuration fiber laser.

Single Mode Mopa Structured All-Fiber Yb Pulse Fiber Amplifier at Low Repetition

Widely Tunable Pulse Duration 100 mJ Single-Mode MOPA System Based on Yb-Doped Tapered Double-Clad Fiber and Nd:YAG Solid-State Amplifiers

11-mJ pulse energy wideband Yb-doped fiber laser

180 Mj, Long-Pulse-duration, Master-Oscillator Power Amplifier with Linewidth Less Than 256 Khz for Laser Guide Stars