Abstract:When designing a fiber laser, it is difficult to achieve both narrow linewidth and high power due to nonlinear effects, especially stimulated Brillouin scattering (SBS). However, using the pseudo-random binary sequence (PRBS) phase modulation technique, SBS can be effectively suppressed in narrow-linewidth fiber lasers during amplification. In light of this, we carried out the experimental research described in this paper. First, based on a theoretical analysis, a narrow-linewidth linearly polarized pulsed fiber laser system was designed; then, an experimental platform of a multistage master-oscillator power amplifier (MOPA) structure was constructed, including one-stage continuous optical amplification and four-stage pulsed optical amplification. In our experiments, without phase modulation, a linearly polarized narrow-linewidth fiber laser achieved an average power output of 17 W and a peak power of 188 kW (repetition frequency of 10 kHz, pulse width of 8.5 ns). At this level of power, the spectral signal-to-noise ratio was about 40 dB, and the beam transmission factors in the X and Y directions were 1.14 and 1.11, respectively. Using PRBS phase modulation, a linearly polarized narrow-linewidth pulsed laser achieved an average power output of 30 W and a peak power of 376 kW (repetition frequency of 10 kHz, pulse width of 7.5 ns) at a clock rate of 1.25 GHz. The polarization extinction ratio was greater than 15 dB, the spectral signal-to-noise ratio was greater than 40 dB, and the beam transmission factors in the X and Y directions were 1.18 and 1.12, respectively.

2.19 kW narrow linewidth FBG-based MOPA configuration fiber laser.

3.3 Kw Narrow Linewidth FBG-based MOPA Configuration Fiber Laser with Near-Diffraction-limited Beam Quality

3 kW narrow linewidth high spectral density continuous wave fiber laser based on fiber Bragg grating

24 kW 1045 nm narrow-spectral-width monolithic single-mode CW fiber laser by using an FBG-based MOPA configuration

2.02 kW and 4.7 GHz linewidth near-diffraction-limited all-fiber MOPA laser

Narrow Linewidth Fiber Laser Oscillator Based on Fiber Bragg Grating with High Power Spectral Density

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

A 376 kW narrow-linewidth pulsed fiber laser based on PRBS

109 W Khz-Linewidth One-Stage All-Fiber Linearly-Polarized MOPA Laser at 1560 Nm

Spectrum Broadening Suppression for Kw-Class Narrow Linewidth FBG-based Fiber Laser

316 W High-Brightness Narrow-Linewidth Linearly-Polarized All-Fiber Single-Frequency Laser at 1950 Nm

52 W Khz-Linewidth Low-Noise Linearly-Polarized All-Fiber Single-Frequency MOPA Laser

15 W high OSNR kHz-linewidth linearly-polarized all-fiber single-frequency MOPA at 1.6 μm.

15 W High OSNR Khz-Linewidth Linearly-Polarized All-Fiber Single-Frequency MOPA at 16 Μm

3.1 kW monolithic MOPA configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes

122-W High-Power Single-Frequency MOPA Fiber Laser in All-Fiber Format

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

Ultra Compact Kilohertz-Linewidth High-Power Single-Frequency Laser Based on Er3+/Yb3+-Codoped Phosphate Fiber Amplifier