Abstract:The relationship between activities of involved deformation mechanisms and the evolution of microstructure and texture during uniaxial tension of AZ31 magnesium alloy with a rare non-basal texture has been thoroughly investigated in the present study by means of electron backscattered diffraction (EBSD) measurement and visco-plastic self-consistent (VPSC) modeling. These results show that except basal slip and prismatic slip, {101¯2} extension twin (ET) also plays a significant role during plastic deformation. With the increasing tilted angle between loading direction and rolling direction (RD) of sheet, the activity of {101¯2} ET possesses a decreasing tendency and its role in plastic deformation changes from the one mainly sustaining plastic strain to the one mainly accommodating local strain between individual grains. When {101¯2} ET serves as a carrier of plastic strain, it mainly results in the formation of basal texture component (c-axis//ND, normal direction). By comparison, when the role of {101¯2} ET is to accommodate local strain, it mainly brings about the formation of prismatic texture component (c-axis//TD, transverse direction). At large plastic deformation, the competition between basal slip and pyramidal slip is responsible for the concentration of tilted basal poles towards ND within all deformed samples. The larger difference is between the activities of basal slip and pyramidal slip, the smaller separation is between these two tilted basal poles. Besides, VPSC modeling overestimates volume fractions of {101¯2} ET in samples with angle of 0 to 30° between loading direction and RD of sheet because interactions between twin variants are not included in VPSC modeling procedure at the present form. In addition, as compatible deformation between individual grains cannot be considered in VPSC modeling, the predicted volume fractions of {101¯2} ET in samples with angle of 45 to 90° between loading direction and RD of sheet are smaller than the correspondingly measured results.

Deformation Behavior and Texture Evolution in an Extruded Mg-Li Sheet with Non-Basal Texture During Tensile Deformation

Effects of Deformation Mechanisms on Texture Evolution and Mechanical Response of the Mg-1Al-0.5Mn-0.3Gd Alloy Under Plane Tension

Ex-situ EBSD Analysis of Yield Asymmetry, Texture and Twinning Development in Mg–5Li–3Al–2Zn Alloy During Tensile and Compressive Deformation

The microstructure evolution and mechanical anisotropy of extruded Mg-2Zn-0.4Ce-0.4Mn alloy tube during tension in different directions

Twinning and Mechanical Behavior of an Extruded Mg–6Al–3Sn Alloy with a Dual Basal Texture

Unique Deformation Mechanisms of Extruded Mg-Y-Sm-Zn-Zr Alloy

The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-Extruded Mg-Zn-Zr Alloy

Strain Path Dependence of Texture and Property Evolutions on Rolled Mg-Li-Al-Zn Alloy Possessed of an Asymmetric Texture

Deformation Behavior and Texture Evolution in an Extruded Mg–1Gd Alloy During Uniaxial Compression

Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture

Effects of Bimodal Basal Texture on Bending Stress and Microstructure Evolution of Mg-2.6Nd-0.55Zn-0.5Zr Alloys

Research on Deformation Mechanism of AZ31 Magnesium Alloy Sheet with Non-Basal Texture During Uniaxial Tension at Room Temperature: A Visco-Plastic Self-Consistent Analysis

Texture Evolution and Deformation Activity of an Extruded Magnesium Alloy: Effect of Yttrium and Deformation Temperature

Texture Evolution and Their Effects on the Mechanical Properties of Duplex Mg–Li Alloy

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Tensile mechanical behavior and texture evolution of the weak texture Mg–1Al–0.5Mn–0.3Gd magnesium alloy

Slip-induced Texture Evolution of Rolled Mg–6Al–3Sn Alloy During Uniaxial Tension along Rolling and Transverse Directions

Texture Optimization on Mg Sheets by Preparing Soft Orientations of Extension Twinning for Rolling

Asymmetric Tension-Compression Mechanical Behaviors of Extruded Mg-4.58Zn-2.6Gd-0.18Zr Alloy with Double-Peak Fiber Texture

The influence of initial texture, microstructure and deformation behavior on the low mechanical anisotropy of extruded Mg alloy tube

Unveiling the Formation of Basal Texture Variations Based on Twinning and Dynamic Recrystallization in AZ31 Magnesium Alloy During Extrusion