Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

A Bi-Directional, Zero-Latency Adaptive Clocking Circuit in a 28-Nm Wide AVFS System

New Design of Clock Self Recovery Circuit Based on Time-to-voltage Conversion

Noise-aware DVFS Transition Sequence Optimization for Battery-Powered IoT Devices.

A Reliable and Efficient Online Solution for Adaptive Voltage and Frequency Scaling on FPGAs

Timing error resilient clock gate design for wide-voltage application

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Negative Design Margin Realization through Deep Path Activity Detection Combined with Dynamic Voltage Scaling in a 55 nm Near-Threshold 32-Bit Microcontroller

A Timing Failure Tolerance Design with In-Field Simultaneous Error Detection and Correction.

A Robust Asynchronous Approach for Realizing Ultra-Low Power Digital Self-Adaptive VDD Scaling System

A Dual-Slope Pfd/Cp Frequency Synthesizer Architecture With An Adaptive Self-Tuning Algorithm

DSC-TRCP: Dynamically Self-Calibrating Tunable Replica Critical Paths Based Timing Monitoring for Variation Resilient Circuits

A Novel Low-Power and High-Speed Dual-Modulus Prescaler Based on Extended True Single-Phase Clock Logic.

Low-power level converting flip-flop with a conditional clock technique in dual supply systems.

A universal delay line circuit for variation resilient IC with self-calibrated time-to-digital converter

Better-Than-Worst-Case: A Frequency Adaptation Asynchronous RISC-V Core With Vector Extension

TICA: A 0.3V, Variation-Resilient 64-Stage Deeply-Pipelined Bitcoin Mining Core with Timing Slack Inference and Clock Frequency Adaption

180.5mbps-8gbps Dll-Based Clock And Data Recovery Circuit With Low Jitter Performance

A 6‐to‐38Gb/s capture‐range bang‐bang clock and data recovery circuit with deliberate‐current‐mismatch frequency detection and interpolation‐based multiphase clock generation

A Timing-Aware Configurable Adder Based on Timing Detection for Low-Voltage Computing

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA