Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Timing error resilient clock gate design for wide-voltage application

Error-Resilient Integrated Clock Gate for Clock-Tree Power Optimization on a Wide Voltage IOT Processor

New Design of Clock Self Recovery Circuit Based on Time-to-voltage Conversion

A Timing Failure Tolerance Design with In-Field Simultaneous Error Detection and Correction.

SGERC: a Self-Gated Timing Error Resilient Cluster of Sequential Cells for Wide-Voltage Processor.

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

Negative Design Margin Realization through Deep Path Activity Detection Combined with Dynamic Voltage Scaling in a 55 nm Near-Threshold 32-Bit Microcontroller

Tbct: Time-Borrowing And Clock Token Based Error Correction And Its Application In Microprocessor

A Near Threshold Error Resilient Processor Based on Dynamic Timing Error Prediction and Within-a-cycle Timing Error Correction

An Energy-Efficient Microprocessor Using Multilevel Error Correction For Timing Error Tolerance

Error Cancellation Flip-Flop Design with Lightweight In-Situ Error Correction

A Unified Clock-Gated Error Correction Scheme with Three-Phase Latch-Based Pipeline for Energy-Efficient Wide Supply Voltage Range Router

Margin Elimination Through Timing Error Detection in a Near-Threshold Enabled 32-bit Microcontroller in 40-nm CMOS

Ultra Low Overhead Error Mask Flip-Flop in Near Threshold Voltage Processor Design

Timing-aware Clock Gating of Pulsed-Latch Circuits for Low Power Design.

The Application of Automatic Gating Clock in SoC Clock Network

A new error masking flip-flop with one cycle correction penalty

A Light-Weight Energy-Efficient Resilient Circuit for Variation Tolerance

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Power-efficient Dual-Edge Implicit Pulse-Triggered Flip-Flop with an Embedded Clock-Gating Scheme.