Abstract:Field Programmable Gate Arrays are extensively used in space, military, and commercial sectors due to their reprogrammable nature. In high-safety environments, ensuring fault tolerance is crucial to improving the performance of electronic and computational systems. Common fault-tolerant methods include time redundancy, double modular redundancy, triple modular redundancy, hardware redundancy, self-checking, self-repairing, and Operand Width Aware Hardware Reuse. This paper introduces a novel approach based on error correction and detection techniques, aimed at reducing hardware complexity while optimizing for low power consumption, high speed, and minimal transistor count. The proposed technique is applicable to various arithmetic circuits. Fault-correcting and fault-detecting adders were designed using a combination of components, including a full adder (comprising one XOR gate, one NOT gate, and two 2:1 multiplexers), three XOR gates, three XNOR gates, one functional unit, two inverters, and two multiplexers (2:1 MUX). To assess the fault tolerance of the design, the technique was applied to an adder circuit, with its performance in terms of power consumption, hardware usage, energy efficiency, and delay simulated using Cadence Virtuoso @90 nm technology. Pre-layout and post-layout simulation results showed a 98% reduction in power consumption, 82% energy savings, 36.5 and 55.95% transistor savings, and a 215% reduction in area overhead compared to existing fault-tolerant adders. Additionally, multiplier designs were tested to validate the fault-correcting adder design.

A Timing-Aware Configurable Adder Based on Timing Detection for Low-Voltage Computing

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

Design Of Variable Latency Adder Based On Present And Transitional States Prediction

Design and Performance Investigation of Tunnel-FET based energy efficient Approximate and Accurate adders targeted towards low power IoT nodes

Ultra Low Overhead Error Mask Flip-Flop in Near Threshold Voltage Processor Design

A Timing Failure Tolerance Design with In-Field Simultaneous Error Detection and Correction.

Fault correcting adder design for low power applications

Light-Weight One-Cycle Timing Error Correction Based On Hardware Software Co-Design

Variable-Latency Adder (Vl-Adder) Designs for Low Power and NBTI Tolerance

Multistage Latency Adders Architecture Employing Approximate Computing

Design of multi-stage latency adders using detection and sequence-dependence between successive calculations

A Light-Weight Energy-Efficient Resilient Circuit for Variation Tolerance

Reconfigurable lower-part approximate adder with error-tolerant application: an approach using QCA computing

Improved Design of a 4-bit Absolute-Value Detector Using Simplified Chain Carry Adder

Margin Elimination Through Timing Error Detection in a Near-Threshold Enabled 32-bit Microcontroller in 40-nm CMOS

Negative Design Margin Realization through Deep Path Activity Detection Combined with Dynamic Voltage Scaling in a 55 nm Near-Threshold 32-Bit Microcontroller

Characterizing Approximate Adders and Multipliers Optimized under Different Design Constraints

Combining Structural and Timing Errors in Overclocked Inexact Speculative Adders.

Edsu: Error Detection And Sampling Unified Flip-Flop With Ultra-Low Overhead

RARA: Dataflow Based Error Compensation Methods with Runtime Accuracy-Reconfigurable Adder