Abstract:This paper proposes an optical fiber sensor based on multimode interference (MMI) with a lateral offset structure to measure tensile strain. The coupling ratio of each higher-order mode in the coreless fiber (NCF) can be controlled by the dislocation distance. The experimental results show that the best interference fringes are obtained when the dislocation is 10 & mu;m and the sensitivity in the range of 0-500 & mu;?????? is 28 pm/& mu;??????. To improve the sensitivity of the sensor further, the measured data were filtered by fast Fourier transform (FFT) and inverse fast Fourier transform (IFFT) to obtain a sinusoidal component, superimposed with a simulated signal to form a vernier effect. With the method of virtual vernier effect, the sensitivity is increased to 452.64 pm/& mu;??????, which is 15.6 times the original sensitivity. Compared with the traditional vernier effect, the virtual vernier effect method does not require cascade or series method, the reference part is not affected by the environment, and the method can be widely used in many types of interferometric fiber optic sensor devices, especially to overcome the problem that MMI is not suitable for vernier effect.

A Fiber Strain Sensor with High Resolution and Large Measurement Scale

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

High-Sensitivity Microfiber Strain and Force Sensors

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

Intensity-Modulated Strain Sensor Based on Fiber In-Line Mach–Zehnder Interferometer

Optical Fiber Strain Sensor with Double S-tapers

Fiber strain sensor based on compact in-line air cavity fabricated by conventional single mode fiber

A Strain-Sensitivity-Enhanced and Intensity-Modulated High Strain Sensitivity Fiber-Optic Sensor Based on Anti-Resonance Hollow Core Fiber

An Extrinsic Fabry–Perot Interferometer-Based Large Strain Sensor with High Resolution

Highly Sensitive Strain Sensor Based on a Sealed Optical Microfiber Coupler

High-sensitivity Strain Sensor Implemented by Hybrid Cascaded Interferometers and the Vernier-effect

High Sensitivity Strain Micro-Fiber Sensor

Highly Sensitive Strain Sensor Based on Tapered Few-Mode Fiber.

Sagnac interferometer-based optical fiber strain sensor with exceeding free spectral measurement range and high sensitivity

Optical Fiber Strain Sensor with High and Tunable Sensitivity.

Optical Fiber Sensor with a Lateral-Offset Structure Assisted by Virtual Vernier Effect for Stretching Strain Measurement

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

A strain-sensitivity-enhanced and asymmetric fiber-optic sensor based on anti-resonance hollow core fiber

High Spatial Resolution and Large Measurement Range Strain Sensor Based on Special Fiber OFDR System