Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

Optical Fiber Strain Sensor with High and Tunable Sensitivity.

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

High-Sensitivity Microfiber Strain and Force Sensors

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure

Sagnac interferometer-based optical fiber strain sensor with exceeding free spectral measurement range and high sensitivity

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

An Optoelectronic Oscillator‐based Strain Sensor with Extended Measurement Range

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Ultra-sensitive strain sensor composed of tapered two-mode fiber micro-cantilever inserted into quartz capillary

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

S-Tapered Fiber Sensors for Highly Sensitive Measurement of Refractive Index and Axial Strain

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Experimental study on a parallel optical fiber Sagnac loops-based sensor with the advantages of both high sensitivity and ultra-wide measurement range

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Interferometric Fiber Optic Surface Plasmon Resonance Sensor for Temperature and Strain Measurement