Abstract:An ultrahigh sensitivity sensor for temperature and strain measurement based on Solc-Sagnac interferometer is demonstrated, which is fabricated by fusing two segments of polarization maintaining fiber (PMF) with a rotation angle. As the lengths of the two PMFs are close to each other, a vernier effect is generated. Through theoretical and simulation analysis, it is found that as the fusion angle is 90°, the envelope can be eliminated and the waveform similar to that of ordinary single-ring Sagnac interferometer is realized. The longer PMF serves as the sensing part, and the changes in temperature and strain cause variations in the birefringence of the sensing fiber which leads to the shift of the interference signal. Three sets of temperature sensing experiments are carried out to demonstrate the influences of the length parameters of the two PMFs on the sensitivity. We find the temperature sensitivities are 16.9, 32.6, and 43.8 nm/°C, respectively, which is improved by 11.3, 21.9, and 29.4 times compared to the ordinary single-ring Sagnac interferometer. Meanwhile, the optimal fiber structure is used for strain sensing experiments whose sensitivity is 785 pm/ $\mu \varepsilon $ which increases by 28.8 times compared with ordinary single-loop interferometer. Then, the dual parameter measurement of temperature and strain is realized by using coefficient matrix. From the experimental results, it can be seen that the fiber structure with a fusion angle of 90° has the vernier effect to achieve the amplification of sensitivity and the corresponding interferometer possesses the advantages of easy demodulation and high accuracy due to the simple waveform.

Sagnac interferometer-based optical fiber strain sensor with exceeding free spectral measurement range and high sensitivity

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Experimental study on a parallel optical fiber Sagnac loops-based sensor with the advantages of both high sensitivity and ultra-wide measurement range

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Ultra-high Sensitivity Sensor for Temperature and Strain Measurement Based on Solc-Sagnac Interferometer

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

A compact fiber-based sensor for wide range strain measurement

High-Sensitivity Microfiber Strain and Force Sensors

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Ultra-high Sensitivity Strain Sensor Based on Biconical Fiber with a Bulge Air-Bubble

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Dual-Parameter Sensing of Parallel Fiber Sagnac Interferometer Based on Vernier Effect

Ultra-sensitive strain sensor composed of tapered two-mode fiber micro-cantilever inserted into quartz capillary

Temperature Insensitive Distributed Wide-dynamic-range Strain Sensing based on Polarization-Maintaining Photonic Crystal Fiber

S-Tapered Fiber Sensors for Highly Sensitive Measurement of Refractive Index and Axial Strain